The HP Community is here for you.
10-03-2013 07:12 PM - edited 10-04-2013 05:52 AM
I'm trying to install another drive in the PC above, but Windows 8 does not recognize it. The BIOS does.
It is connected to the spare power plug on the main HD, and to the motherboard SATA1 port.
Is there something I'm missing. I've tried putting the drive jumper to limit to 1.5 gb/sec, but that doesn't work.
I normally build my own machines, so I do know my way around these machines.
10-03-2013 07:57 PM
Mike, welcome to the forum.
I am not certain that this is the answer to your problem, but I wanted to begin with updating the "Firmware" of the drive. If you have already done this step, please let me know.
Please click "Accept as Solution" if your problem is solved.
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP Omen X; i7-6700K; 16 GB DDR4 2133; GTX 1070; 256 GB SSD M.2; Win 10 Home
HP Photosmart 7520 AIO
|**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**|
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.
10-04-2013 09:10 AM - edited 10-04-2013 09:31 AM
As your system has UEFI BIOS, you'll need to actually "enable" the Sata port. Look at the BIOS, Security tab, Devices.
Please click Accept as Solution, if your problem is solved. To say THANK YOU, press the "thumbs up symbol" to render a KUDO. You can render both Solution and KUDO..
Loaner: Envy Omen Windows 10 Pro 64 bit 4th Gen Intel(R) Core(TM) i7-7700HQ + NVIDIA GeForce GTX 1070M 8GB Discrete Graphics (16GB RAM) 512GB m.2 SSD
HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro, 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 8GB, 500GB HD SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and OCZ 750W.
Printer -- HP OfficeJet Pro 8620
10-04-2013 01:58 PM - edited 10-04-2013 01:59 PM
I think that UEFI is messing me up. I've been reading page after page trying to figure that mess out.
I can't even get the machine to boot from the Seagate Diagnostics CD.
10-04-2013 02:09 PM - edited 10-04-2013 02:21 PM
Well, that did no good. Everything is enabled.
How do I boot from a iso image CD?
Should I switch to Legacy mode? If I can figure it out.
Maybe I'll take this thing back and build my own system. Windows 8 is frustrating anyway.
10-04-2013 02:39 PM - edited 10-04-2013 04:20 PM
Well, I got it into Legacy mode, but the thing still won't boot to the Seagate iso CD.
If I can't get it going by tomorrow, this thing is going back to BestBuy, and I'll spend a ton of money at MicroCenter.
I've been a faithful HP user with several machines, but this is busting my balls.