cancel
Showing results for 
Search instead for 
Did you mean: 
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
HolyMolyCannoly
New member
4 2 0 0
Message 1 of 4
1,156
Flag Post

Re: I need the manual of the Memphis-S motherboard

HP Recommended

Great i found this page! Had the same problem with the same motherboard!

 

Since you seem to have some knowledge about this, can you tell me if you can connect USB 3.0 cables from the front of an case (this case it's the Corsair 200R) to this MB? I connect it to USB_1 on the mb (i don't know the name of this type of connection) but it doesn't seem to work :S

 

0 Kudos
3 REPLIES 3
wb2001
Level 15
Level 15
12,842 12,635 1,771 4,998
Message 2 of 4
Flag Post
HP Recommended

@HolyMolyCannoly,

It would not be possible.  And why would you try?

The typical motherboard connector for USB3.0 is 2 x 10 block, with 1 pin missing.

https://www.google.com/search?q=usb+3.0+motherboard+header&tbm=isch&tbo=u&source=univ&sa=X&ved=0ahUK...

 

 

This system is feedback driven thru Solution and Kudo flags. It's the only means of knowing if you have been served. Please click Accept as Solution, if your problem is solved. To say THANK YOU, press the "thumbs up symbol" to render a KUDO. You can render both Solution and KUDO..

HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
Printer -- HP OfficeJet Pro 8620 Legal
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 AMP Extreme 3 fan 8GB RAM, 500GB SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and 750W OCZ PSU.
0 Kudos
wb2001
Level 15
Level 15
12,842 12,635 1,771 4,998
Message 3 of 4
Flag Post
HP Recommended

@HolyMolyCannoly,

It would not be possible.  And why would you try?

The typical motherboard connector for USB3.0 is 2 x 10 block, with 1 pin missing.

In this article, you will see a pic of the proper cable and motherboard header.

 

 

 

This system is feedback driven thru Solution and Kudo flags. It's the only means of knowing if you have been served. Please click Accept as Solution, if your problem is solved. To say THANK YOU, press the "thumbs up symbol" to render a KUDO. You can render both Solution and KUDO..

HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
Printer -- HP OfficeJet Pro 8620 Legal
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 AMP Extreme 3 fan 8GB RAM, 500GB SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and 750W OCZ PSU.
0 Kudos
HolyMolyCannoly
Author
New member
4 2 0 0
Message 4 of 4
Flag Post
HP Recommended

I think i explained myself badly.

 

The MB in question DOES have an conector like that one you showed (name on the board F_SSUSB1)

 

 

This board was previously on an HP Pavillion 500-501np, which has front-case usb 3.0 ports). 

 

The problem is that nothing happens with that connected. I don't know why :S 

 

The USB ports on the back of the MB work just fine.

 

Am i missing some drivers or something?

0 Kudos
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation