cancel
Showing results for 
Search instead for 
Did you mean: 
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
bitu33
New member
3 1 0 0
Message 1 of 4
670
Flag Post

Sensors on motherboard HP 085 Ch (ASUS P4SD-LA

HP Recommended
HP 085 Ch (ASUS P4SD-LA
Linux

Hello!
I use Debian Jessie 8 XFCE 32 bit,I have a motherboard HP 085 Ch (ASUS P4SD-LA) with a pentium 4 2,8 GHz processor and 1 GB of ram.
So my problem is that when I type command "sensors" in terminal I receive this:

adt7463-i2c-0-2e
Adapter: SMBus I801 adapter at fc00
in0: +0.01 V (min = +0.00 V, max = +3.32 V) ALARM
Vcore: +1.49 V (min = +0.00 V, max = +2.99 V)
+3.3V: +3.27 V (min = +2.97 V, max = +3.63 V)
+5V: +4.98 V (min = +4.50 V, max = +5.50 V)
+12V: +3.25 V (min = +0.00 V, max = +15.94 V)
fan1: 0 RPM (min = 0 RPM)
fan2: 0 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
temp1: +33.2°C (low = -127.0°C, high = +127.0°C)
M/B Temp: +36.8°C (low = -127.0°C, high = +127.0°C)
temp3: +39.2°C (low = -127.0°C, high = +127.0°C)
cpu0_vid: +1.525 V

nouveau-pci-0100
Adapter: PCI adapter
temp1: +33.0°C (high = +95.0°C, hyst = +3.0°C)
(crit = +130.0°C, hyst = +10.0°C)
(emerg = +135.0°C, hyst = +5.0°C)

Can anybody tell me what is temp1,M/B Temp and temp3?I don't see anythink about the processor...and with the sensor plugin I can't use ACPI.
Thank you and sorry for my bad english!

0 Kudos
3 REPLIES 3
WAWood
Level 16
Level 16
30,460 30,367 2,775 6,706
Message 2 of 4
Flag Post
HP Recommended

bitu33

 

Hello;

Allow me to welcome you to the HP forums!

 

 

Unfortunately, the interpretation of the temp readings vary by hardware.

 

Here is an article from SuperUser that has some useful information: http://superuser.com/questions/878896/how-to-understand-the-output-of-lm-sensors

 

Also, HP does not really support Linux, so your best source of answers for Linux question are the various Linux support forums.

Good Luck

***If my post helped, click the thumbs-up symbol to say thanks***

***Please mark Accept As Solution if my post solved your problem***

I am a volunteer and I do not work for, nor represent, HP
0 Kudos
bitu33
Author
New member
3 1 0 0
Message 3 of 4
Flag Post
HP Recommended

Thank you so much!

I also find some information here https://ubuntuforums.org/archive/index.php/t-2226628.html

Have a nice day!

You can close the post!

Solved!

0 Kudos
christyrainwate
New member
1 1 0 0
Message 4 of 4
Flag Post
HP Recommended
I need a revers
0 Kudos
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation