The HP Community is here for you.
09-30-2012 03:39 PM
I have a new HP Pavilion HPE h8 1234 pc and I just added a second internal 1TB SATA drive. The new drive does not show up in my computer or in the computer management/disk management window. How can I get the system to recognize it?
09-30-2012 03:48 PM
Launch the Control Panel:
1 - Select System & Security
2 - Select Administrative Tools
3 - Select Computer Management
4 - Select Disk Management
5 - Select "unlettered" drive (then right mouse on the drive)
6 - Add a drive letter
7 - Volume now appears in windows explorer and you should be able to access the drive.
or: if this is what you're seeing instead...
In step 5, if you do not see any thing saying "unlettered", but see that the second drive had a red "x" on it, you do the right-mouse click and chose "online". The drive letter should appear, and the volume should now appear in windows explorer, and I should be able to access the drive.
09-30-2012 03:48 PM
Please enter the BIOS and verify that the second hard drive shows up in the "Storage / Device Configuration" menu. If the hard drive isn't listed here, Windows will never see it.
***** Please click the "White Kudos" Thumbs Up to say THANKS for helping *****
***** Please click the "Accept As Solution" on my post, if my help solved your issue *****
***** This is a user supported forum. I am a volunteer and I don't work for HP *****
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240
HP ENVY x360 m6-w103dx - Windows 10, 8GB RAM, Intel HD 520
09-30-2012 04:23 PM
Thank you to both of you for the suggestions. The drive does not show in the disk management screen as either a unlettered drive or red X. Bios does recognize the drive. I noticed a couple things that may or may not be of significance. The drive that came with the computer is a SATA 6G and the drive I just added is showing up as a SATA 3G. I also noticed that under the storage options in the bios storage device menu, the primary drive is set to RAID. However, in other places it shows "RAID ready". The drive I added came from another computer I had for about a year before the mother board went bad. TIA
09-30-2012 07:49 PM
You're very welcome.
I was looking around and found this, which I copied and pasted below...
"Click Start, RIGHT-click My Computer in the window, then click on Manage from the menu. In the new Computer Management window expand "Storage" if necessary and click on Disk Management.
Now, examine the TWO right-hand panes. The upper one shows you only the devices Windows already knows how to use.
The lower one, which SCROLLS, also shows you other devices Windows does not yet understand.
Your new disk should be here with no letter name and no info. RIGHT-click on it and, from the menu, choose to Partition the drive. You'll have a choice of how big it should be and most likely want to use all the drive in one volume. (You can use only part of the space.
If you do, when you are finished come back here and find the remainder shown as "Unallocated Space". You can create a second Partition or more in it if you want.) For this first Partition, make it the Primary or Active Partition, and NOT bootable because this drive is for data only - you already have a boot drive. When all the choices are made, go ahead with the Partition operation.
When that is done, come back to this new Partition and RIGHT-click again and choose to Format it. Choose the NTFS File System option. A Quick Format will do the job in 5 to 15 minutes.
A Full Format will do a Quick Format, then go though every sector of the drive and test it, marking off any faulty ones (very rare) so they won't be used. Full Format takes many hours!
When you are done, reboot and your newly prepared hard drive should show up in My Computer as an empty unit ready for use."
10-01-2012 04:36 PM
Thanks again Paul. When I woke this moring I had a box on my desktop asking if I wanted to format drive "L". I decided to jump over the the disk management window first to see it it was showing up there and it was. Unfortunately, I didn't have time to mess with it then and when I returned it had disappeared again and I could not get it back. I have a feeling my drive is bad.