The HP Community is here for you.
01-10-2014 04:14 PM
I have a Z400 workstation (L5639 CPU w/8 GB RAM) with a clean install of Windows 7 x64 on a brand new Samsung 840 Pro SSD. While the BIOS shows that RAID + AHCI is enabled and I even installed the latest Intel driver for the controller, the Samsung benchmark utility shows performance at about half what it should be based upon what I've seen from others using this drive. It appears to be running in IDE mode to me.
I've seen one relevant thread here from someone working with a Z420 and this same drive and they solved it by using the Intel driver rather than the default that installs in W7, but that didn't make any difference in my case.
If anyone has any suggestions I'd greatly appreciate it. I've attached some of the relevent screen shots.
Thanks in advance.
Solved! View Solution.
Re: Z400 + SSD + AHCI
01-10-2014 04:22 PM
01-10-2014 05:56 PM
Thanks Alex. Yes, onboard SATA port. Sorry that I omitted that.
And you may be correct for the 3G port. I was expecting more based upon some previous data that I'd seen but may have been looking at 6G and simply not made the connection.
01-10-2014 11:33 PM
Alex hit the nail on the head.....
In the Z400 there only are SATA generation II ports, which have3 Gbit/s (300 MB/s) max speeds, but the Z420 has both SATA generation II and III ports with the speeds up to 6 Gbit/s (600 MB/s).
See attached Z400 and Z420 HP brochures, under the "drive controllers" detail.
01-11-2014 04:17 AM
Thanks Scott. It does appear that Alex is correct. I went through the quickspecs on the 400/420 after he mentioned the controller issue and it is clearly USB 2/3.
I feel better that I'm not missing anything and I also agree with Alex that for real world use, the controller difference won't be significant with this SSD.