The HP Community is here for you.
12-04-2009 06:03 PM - edited 12-04-2009 06:03 PM
I just purchased a pavilion slimline s5220y pc. I need a way to connect it to my older ipod which is firewire only. I purchased a card to put in the computer, and I am not sure it will fit (but I don't know much about the insides of computers. Can someone please help me with this? Thank you. Ironically, my old slow computer had a firewire port right on the front.
12-05-2009 02:41 AM - last edited on 04-18-2016 11:16 AM by OscarFuentes
Here is the page for your system.
Here is the page for your motherboard.
The onboad modem takes one of the PCI-X1 slots. It appears a PCI or PCIx1 firewire card would fit. Remove the side panel of the computer with the power off after grounding yourself and insert the card into the available open slot. Be sure it's seated properly and fits snuggly against the port/case as the other card does. Put the system back together and turn it back on, and Windows should install generic firewire drivers automatically.
12-05-2009 01:12 PM
Thank you very much. I am definitely a novice and the pictures and drawings help and hopefully once I look in there it will be more clear.. So if I am reading this correctly, I have one space left that will take PCI and one that will take PCI express. I had already purchased a card called Ultra 7 Port Firewire/USB 2.0 PCI card. Does this sound right ? If so, I will give it a try! I might open up my old computer first and take a look around before I get brave enough to open the new one. Thanks again.
12-07-2009 06:14 AM
New development. Opened up computer and there is a fan and some other stuff blocking the PCI port. Soooo, there are two PCI express 1x ports. One appears empty but it doesn't seem like there is a place on the outside for the plugs to stick out. The other one has a phone jack coming out of it. Can I remove the one with the phone jack safely since we are not using it, or will this screw up other things in the computer? Thank you.
12-07-2009 11:39 AM - edited 12-07-2009 11:43 AM
There seems to be a mix-up between the product specifications and the motherboard documentation for your PC. The motherboard shows that your computer has 1 PCI, 2 PCIe x1 and 1 PCIe x16 ports but the product specifications show your PC with only 1 PCIe x1 and 1 PCIe x16 port. There should be no fan in the way of the PCI port, it would be at the very bottom of your PC case if you actually have one, the fans are mounted in the upper top half of the case. Only the PCI port will work with the card you purchased so you need to take a good look at the motherboard from the link provided above to see if your computer actually has one. From your last reply it sounds like it does not. Look at Figure 1: layout - at the bottom just below the BATT (battery) there is a long rectangular connector labeled PCI 1. That is where you would need to install the card. If that is not your motherboard then you will need to exchange or return the card and get a PCI Express x1 (or PCIe x1) card. Then you can remove the modem card (the one with the phone jack) and replace it with your new Firewire PCI express card. You don't really need all those extra USB ports that your computer already has. Here's one of the cheaper ones at Newegg that would work fine for you, has good reviews and supports your Windows 7 operating system.
12-09-2009 03:37 PM
There is definitely something (maybe not a fan) covering up the PCI port--I looked inside briefly the other day, but I don't want to open it back up until I have to. I will look closer when I install the card. I returned the PCI card and have ordered a PCI express card with a low profile bracket ( I bought one the other day, but only had a regular bracket and they said it wouldn't fit). I guess these slimline computers have to squeeze everything in them? So, I am waiting to get that one from Amazon (I believe it is Syba? brand). Sounds like it is OK to remove the modem with no problems? Thank you.