The HP Community is here for you.
07-19-2012 05:07 PM
I have a p6616 and I wanted to install a PCI-e USB 3.0 card, so I bought one. But it does not work. I insert the card, install with most recent drivers from manufacturer website, the device manager says everything works fine, but nothing works, not even mouse.
Desktop: HP p6616
product code xj031ea
mobo: MS-7613 (Iona-GL8E) motherboard
card (which I tried in two different PCI-e slots): Y-6119 USB 3.0 PCI-e card with 4 usb 3.0 ports (two ports in the back and two in front panel). Manufacturer http://unitek-products.com/en/ I realize mobo is PCI-e 1.0 but it should work with 2.0 card, actually I specifically picked a 2.0 lest I have problems with 2.1 and of course I realize I won't get the speed of the specs but yet it should work.
The other PCI-e x4 and the mini PCI are unused, while the PCI-e x16 has installed a video card (geforce gts 450). PSU is more than adequate (cooler master silentpro M 850W). There is no overheating problems as I added fans and I monitor temperatures carefully.
I have tried the mouse on these usb 3.0 with low load on the system, with the system only having to deal with keyboard, wi-fi usb (edimax 11n), two HDD and one SSD (but doing nothing), the built-in CD-DVD (idle) and card reader (idle). Even if there were a problem with the mobo handling power or data rate to be dished out, it should not appear under these conditions, regardless of the fact that really it shouldn't be happening.
I never tried the PCI-e slots with other cards since I have the computer (I got it in dec. 2010) but I suppose they work just fine, as the device manager is happy with them and even recognizes the card, which, however, does not work.
BIOS does not appear to have any setting which can be helpful, but perhaps I am overlooking something... I hope.
I am at my wit's end.
Thank you so much to everyone who can help.
Solved! View Solution.
Re: p6616 PCI-e USB 3.0 card problems
07-20-2012 01:03 PM
07-20-2012 01:03 PM
What is the USB 3.0 driver version? The card has the VIA chipset so you might try a later driver and a possible firmware update.
The PCI-E card has another connector on it. I suspect that connector is used for additional card power. I would hook it up.
HP Photosmart 6520 and HP Deskjet 1112
Custom 1151 socket Z270 Intel i7-7700k @4,600 Mhz, 16GB Corsair 3000 Mhz dimms
Corsair H75 water cooler, Corsair CS 650M power supply
RAID 0 (dual Samsung 960 EVO m.2 240GB) boot system
Dual Samsung 840 EVO SSDs 500GB data storage, Intel 750 PCIe SSD 400GB
MSI NVIDIA GTX 980TI 6GB
ASUS ROG PG279q @144 MHz
Windows 10 and Windows 8.1 Pro x64 in UEFI mode
07-24-2012 05:23 PM
As you say, it wanted to be powered from the small connector ("floppy drive"). Sorry for delayed reply, I was wary of frying everything and double checked with the card manufacturer
Thank you a lot