-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Archived Topics
- Desktops (Archived)
- Re: " BIOS Not ACPI Compliant " Error message installing Win...
Create an account on the HP Community to personalize your profile and ask a question
04-02-2010 11:43 PM
Hello: My computer is a Pavilion a850y Pentium 4HT 3.8 MHz, just installed a new sata hard drive and tried to install Windows XP Home Edition. During the start of the install, right after the drivers loaded I got the following Message:
A problem has been detected and Windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen restart your computer. If the screen appears again, follow these steps..
The Bios in this system is not fully ACPI compliant. Please contact your vendor or visit http:www,hardware-update.com for an updated BIOS. If you are unable to obtain an updated BIOS or the latest BIOS supplied by your vendor is not ACPI compliant, you can turn off ACPI mode during next mode setup. To do this, simply press the F7 key when you are prompted to install storage drivers. The system will not notify you that the F7 key was pressed - it will silently disable ACPI and allow you to continue installation.
Technical information: ***STOP:0x000000A5 (0x00000011,0x00000004,0x00000000,0x0000000)
Well, pressing F7 just stopped the install again at a blue screen with "Windows Setup" on the screen.
The only BIOS upgrade found on HP site needs Windows running to install.
My BIOS IS: BIOS Revision 3,10 11/12/04 Core version 08.00.10
Computer Product # PU005AV S/N MXP450048D Service ID: PU005AV-PU008AV
The only thing that was ever updated on this computer is the memory. The old hard drive is gone. I've tried another new hard drive with the same results. The installation of Windows XP justs stops after drivers load.
Anyone know where to get an update for the BIOS I can load from cd or floppy without Windows running?
Any help would be much appreciated!
Thanks,
CDB
Solved! Go to Solution.
Accepted Solutions
04-03-2010 12:12 AM
I've seen that error before when installing XP after a memory upgrade on Pavilion desktop. At the time, I just removed the extra memory and installed XP, then reinstalled the memory.
Odd thing is, I later installed XP again with no problems leaving the extra memory in.
**Click Accept as Solution on a Reply that solves your issue**
***Click the "YES" button if you think this response was helpful.***
04-03-2010 12:12 AM
I've seen that error before when installing XP after a memory upgrade on Pavilion desktop. At the time, I just removed the extra memory and installed XP, then reinstalled the memory.
Odd thing is, I later installed XP again with no problems leaving the extra memory in.
**Click Accept as Solution on a Reply that solves your issue**
***Click the "YES" button if you think this response was helpful.***
04-03-2010 11:34 AM
Window XP doesn't like SATA drives unless you have an OEM XP disk with sata drivers built into it.
I see two options if you don't have an OEM XP installation disk with SATA drivers built into it.
1. Enter the bios and change the sata controller for the hard drives to run in IDE mode.
2. Acquire the correct sata drivers and use nLite to merge the drivers with your existing Windows disk and build a XP installation disk with sata support.
HP Envy 17", i7-8550u,16GB, 512GB NVMe, 4K screen, Windows 11 x64
Custom PC - Z690, i9-12900K, 32GB DDR5 5600, dual 512 GB NVMe, gen4 2 TB m.2 SSD, 4K screen, OC'd to 5 Ghz, NVIDIA 3080 10GB
04-04-2010 08:28 AM
After removing the RAM memory, I installed only 1 GB chip and was able to get Windows XP loaded. I then finshed installing the drivers that I downloaded from HP sight for this computer, the soud, graphics, ect and it is up and running. However the network driver seems to be the wrong one. Will be back to find that one after posting this. Thanks so much for your help CherylG! You hit the nail on the head!
CDB
04-04-2010 09:10 AM
You're welcome, happy to hear you have XP installed. 🙂
For network try:
**Click Accept as Solution on a Reply that solves your issue**
***Click the "YES" button if you think this response was helpful.***
01-08-2017 08:47 AM
Welcome to the HP FORUM.
> Re: " BIOS Not ACPI Compliant " Error message installing Windows XP - Pavilion a850y
> 01-08-2017 05:35 AM
02-08-2019 12:16 PM
I've seen that error before when installing XP after a memory upgrade on Pavilion desktop. At the time, I just removed the extra memory and installed XP, then reinstalled the memory.
Odd thing is, I later installed XP again with no problems leaving the extra memory in.