The HP Community is here for you.
12-01-2010 11:27 AM
I recently purchased an HPE-480t with a Premium Wireless-N LAN card and Bluetooth.
My HP Laptop in the same location receives a 3-4 bar signal from my Linksys WRT54G, but my desktop indicates the signal is too weak to connect.
Is it necessary to connect an antenna to the desktop to receive a better signal, upgrade to an "N" router, or both?
If either or both options are necessary, can anyone suggest a compatable antenna and/or router?
12-02-2010 08:57 PM - edited 12-02-2010 08:58 PM
Roger, here is the 'Solve a problem' section for 'Wireless/Networking/Internet for the computer. I am very new to wireless networks. In fact, I have only been using one for a couple of weeks. In that time, however, I have had enough problems to add to my expertise. The biggest problem is normally caused by the location of the wireless hot-spot. If it is too far from the computer that can cause a problem. Also, you may be getting interference from your laptop or other device, such as, a wireless phone.
I am using a Cisco Valet Plus (AM20) router, with a USB Cisco Valet Connector (AM10) with Qwest DSL. The wireless connection is a bit slower than my previous wired connection. I also use the LAN to stream movies and other media to my Sony 52" 3D Bravia and Blu-ray disc player with built-in WiFi. The router is located on the second floor and the TV is located on the first floor. I have a great connection. It is at 100% most of the time.
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP Omen X; i7-6700K; 16 GB DDR4 2133; GTX 1070; 256 GB SSD M.2; Win 10 Home
HP Photosmart 7520 AIO
|**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**|
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.
12-02-2010 10:17 PM
To get the full benefit of the wireless n you will need a wireless n router. It can be helpful to use an antennae if necessary.
Remember that your computer has to transmit as well as receive and it cannot excede the limits of the router.
That said, if you hadn't looked at the signal strength would you be aware of it?