cancel
Showing results for 
Search instead for 
Did you mean: 
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
adzski999
New member
1 0 0 0
Message 1 of 2
288
Flag Post

z2 mini dual screen e230t touch issue

HP Recommended
z2 mini g3
Microsoft Windows 10 (64-bit)

hi

 

i have 2 x e230t touch screens attached to my z2 mini and touch commands are being sent from one monitor to the other.

Both screens operate correctly by themselves. When they are both attached one screen works correctly but the 2nd sends touch info the other. In device manager i have 2 screens listed but 1 "lgt ait touch controller". I am suspecting its an issue with this touch controller.

 

any ideas out there?

 

thanks!

 

0 Kudos
1 REPLY 1
KingKK88
New member
1 1 0 0
Message 2 of 2
Flag Post
HP Recommended

This is a setting governed by windows. In windows 8 or windows 10 you need to go to the control panel under Hardware and Sound / Tablet PC Settings. Then click on setup. Hit enter on the screens that are not touch and touch the screens that are. Then you are done.

0 Kudos
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation