How to remove monitor stand?

[akirashakira]

How can I remove the monitor stand? just bought a new monitor arm but idk how to remove this stand. need help asap cant find anything anywhere. also no screws on it, so no clue how to remove it.

[Max3Aj]

@akirashakira, Welcome to HP Support Community. 

Thank you for posting your query, I will be glad to help you. 
Got you covered! The OMEN 27q monitor stand removal can be a bit tricky at first glance since it’s designed to be tool-free and sleek. Here's how to safely remove the stand:

🔧 Steps to Remove the Stand from the OMEN 27q Monitor:

Lay the Monitor Face Down on a Soft Surface:

• Place a towel or foam on a flat surface (like a table or bed) to avoid scratching the screen.
• Gently lay the monitor face-down.

Locate the Stand Release Button or Tab:

• Where the stand arm connects to the back of the monitor, look for a small release latch or button.
• On the OMEN 27q, it’s often a push-in tab or recessed button near the connection point (just above or around the stand neck area).

Press the Release Tab:

• Hold the base/stand to keep it stable.
• Press the release button/tab firmly inward while pulling the stand straight down or away from the monitor.
• It may take a bit of force, but do not twist—just pull directly outward.

Attach VESA Mount:

• Once the stand is removed, you’ll see the 100x100mm VESA mount holes exposed.
• Use those for your new monitor arm.

💡 Tips:

• If you can't find the release tab, shine a flashlight where the stand meets the back of the monitor—it’s usually camouflaged a bit.
• If you're still stuck, feel free to send me a photo of the stand connection point and I’ll help guide you from there.

I hope this helps. 

Take care and have a good day. 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping! 

Max3Aj

HP Support