• ×
    Information
    Windows update impacting certain printer icons and names. Microsoft is working on a solution.
    Click here to learn more
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Windows update impacting certain printer icons and names. Microsoft is working on a solution.
    Click here to learn more
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
The HP Community is where owners of HP products, like you, volunteer to help each other find solutions.
HP Recommended
p6-2327c
Microsoft Windows 10 (64-bit)

Hi, I am using p6-2327c (upgraded to Win 10) with bios v8.06. and trying to install a Radeon rx 550 graphics card.

 

Is there some trick to get the computer to recognize the graphics card ? I have disabled the integrated graphics card in device manager, plugged in the Raden card connected it to the monitor and rebooted nothing happens.

 

From other posts I have seen about other models there should be a switch in the bios to use an external card if present but I cannot find anything like that in bios v8.06. 

 

Thanks in advance.

 

2 REPLIES 2
HP Recommended

@p6-2327c

 

Recommendation for PSU is 400W

 

   http://www.amd.com/en/products/graphics/radeon-rx-550

 

and your machine only has 300W

 

   https://support.hp.com/au-en/document/c03517213

 

Could be a bit short of power.

 

Regards.

 

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.




HP Recommended
I have connected a PSU with over 400w. Reset the bios to default then disabled the security on the pci slots, insert the card and still don’t see the card in device manager.

I don’t see how drivers can load without recognizing the device (obvious statement) but I haven’t found anything in the bios settings that would make it look for the non-integrated card
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.