OMEN Gaming hub boots with max overclocking and causes crash within 30 seconds

[39485yubnqweurq]

I have to downclock immediately after boot or the pc restarts.  165/1.2 is a stable setting but I can't figure out how to get the PC to retain that.  I make the change through OMEN gaming hub but there is no way to save the settings.  How do I save the default setting?

[Irfan_06]

Hi @39485yubnqweurq,

Welcome to the HP Support Community.

Thank you for posting your query, I will be glad to assist you.

I see that you are facing an issue with your PC that crashes when turned on.

Please follow the steps below to perform an extensive system test to confirm if the hardware is working fine.

1) Shut down the computer.

2) Turn the computer back on again and repeatedly tap on the ESC until a Startup menu appears.  

3) Press F2 once.  

4) Go to the system test > extensive test

If the hardware is working fine. Kindly refer to the steps on this link to update the BIOS and let me know if that resolves the issue.

Make sure you keep only the charger plugged in while updating the BIOS for your PC.

Click on the + sign next to BIOS and then download the file.

Open the file and follow the on-screen instructions to complete the update.

Please install all the pending updates for the Windows operating system by following the below steps.

go to Start > Settings > Update & Security > Windows Update and select Check for updates. If the upgrade is available for your device and you want to proceed, download and install it.

If the issue still persists, Check the 'OMEN Performance Control' setting by clicking on the link.

Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.

I hope this helps.

Take care and have a great day ahead!

 Irwin6

HP Support