cancel
Showing results for 
Search instead for 
Did you mean: 
viking4life
New member
1 0 0 0
Message 1 of 2
260
Flag Post

omen command center dont work properly

HP Recommended
Microsoft Windows 10 (64-bit)

its like this all the time. and no buttons on the command center worksits like this all the time. and no buttons on the command center works

1 REPLY 1
Photoray002
Level 15
Level 15
12,677 12,431 1,308 4,305
Message 2 of 2
Flag Post
HP Recommended

Hello @viking4life 

 

This might or might not help...

Go to Windows updates and manually update Windows... All Settings>Update & Security>Check for updates and force it to look for updates until there are none.

Open the HP Support Assistant and make it check for updates/drivers and install any that it finds.

Go to the Search bar and type Omen Command Center (OCC) and uninstall it. Then install it from this link... Get OMEN Command Center - Microsoft Store 

 

Go to the Search bar again and type Services and open it. Make sure the HP Omen HSA is enabled. Should be set to Running Automatic. If not, right click on it and choose Properties and change it.

HSA.JPG

 
 
Next...

Go to Device Manager... Type Device Manager in Search and hit the Enter key.

Scroll to Software Components and expand the arrow.

Right-click HP Software and Services, and then click Properties.

Navigate to the Driver tab and click Update Driver.

Do the same for Omen Software and Services.

 

Restart the OCC and see if it works.

 

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation