cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
Highlighted
New member
3 2 0 0
Message 1 of 6
362
Flag Post
HP Recommended

Solved!

880-139 blue screen error

HP Omen 880-139
Microsoft Windows 10 (64-bit)

On starting the computer a blue screen comes up that says:

Recovery

Your PC/Device needs to be repaired

A required device isn't connected or can't be accessed. 

Error code: 0xc000000f

You'll need recovery tools.

 

I have a USB that I used before with a different error. When I try to boot from it the omen logo appears then it goes to a blue screen with a recovery manager error box with yellow triangle and 0XFFEE018. It will go no further. A y advice appreciated. 

5 REPLIES 5
Highlighted
Level 20
Level 20
117,341 107,522 17,030 26,077
Message 2 of 6
350
Flag Post
HP Recommended

Solved!

880-139 blue screen error

Hi:

 

I have a couple of suggestions for you, but those are all I have.

 

They will both require you have access to another windows PC with W7 or newer installed.

 

1. Your PC seems to be supported by the HP cloud recovery client utility, so try that first and see if you can make a bootable recovery drive.

 

Here's the link for how to use the cloud recovery client utility.

 

https://support.hp.com/us-en/document/c06162205

 

2. Make W10 installation media using the Media creation tool at the link below.

 

https://www.microsoft.com/en-us/software-download/windows10

 

After W10 installs, you can install the drivers and available software from your PC's support page.

 

https://support.hp.com/us-en/drivers/selfservice/omen-by-hp-880-100-desktop-pc-series/18695893

 

As long as you install the right version of W10 (in your case W10 Home), you will not need to enter the product key that is in the BIOS.

New member
3 2 0 0
Message 3 of 6
322
Flag Post
HP Recommended

Solved!

880-139 blue screen error

I used the  hp cloud recovery tool and booting from that I still get the recovery manager error box:

20190918_223814.jpg

If I click enter, the error message changes the last 2 digits a few times then back to the recovery page. Most recently with this message:

20190921_192522.jpg

I then downloaded the hp recovery tool hoping for better luck, but still the same. I've tested memory and hard drives on hp pc diagnostics UEFI.

Should I try the Microsoft link now?

Thanks for your help. 

0 Kudos
Highlighted
Level 20
Level 20
117,341 107,522 17,030 26,077
Message 4 of 6
320
Flag Post
HP Recommended

Solved!

880-139 blue screen error

You're very welcome.

 

At this point, yes I would.

 

The Microsoft tool is not going to look for the recovery manager.

 

You should just be able to boot from it, and it will begin to load the W10 installation files.

Highlighted
New member
3 2 0 0
Message 5 of 6
254
Flag Post
HP Recommended

Solved!

880-139 blue screen error

Had to use the Microsoft to get the computer to boot. Then I was able to get back to the factory state by booting from the HP recovery media I had downloaded. Thank you so much again.

0 Kudos
Highlighted
Level 20
Level 20
117,341 107,522 17,030 26,077
Message 6 of 6
247
Flag Post
HP Recommended

Solved!

880-139 blue screen error

Anytime.

 

Glad to have been of assistance.

0 Kudos
Be alert for scammers posting fake support phone numbers on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation