BIOS update fails and laptop turns off

[bsak01]

Hey, I had a forced BIOS update on my laptop. But when the update was finished and the laptop restarted this black background and another BIS update which says "Writing new BIOS image" appears, and then the laptop dies at like 50%. When i press the powerbutton again, the same thing happens. It starts to Progress, and then the laptop dies again.

I Tried the "windos" + B + powerbutton trick. This restarted the BIOS update, but the same thing happens when it restarts after the update. It starts to progress, then it dies.

Any tips to fix this?

 

[ub6424]

Hello @bsak01 

I would like to help you...

Sorry, but in your case: Service is required !
- The computer should be disassembled and checked.
- Thermal paste for CPU GPU and bridges must be renewed
- The function of the fan(s) must be checked

- Short circuit test 

- Bios (chip) desolder, reflash, Bios (chip) solder in

- charger/battery test

- Components test

- General cleaning ...

--- HP warranty valid -> Contact HP Support

--- HP warranty expired:

If you can't do that, you should have it <serviced> by a professional notebook (chip level) repair store.

Download -> Maintenance and Service Guide

Good luck

[ub6424]

Hello @bsak01 please report your results