cancel
Showing results for 
Search instead for 
Did you mean: 
Jugantic
New member
3 2 0 0
Message 1 of 6
252
Flag Post
HP Recommended

CPU help

HP Omen 870-224
Microsoft Windows 10 (64-bit)

I have the Odense2-k motherboard, and I was wondering if I could upgrade the cpu to a intel i5 9400f, or an amd ryzen 5 2600. Or what cpu would be recommended for streaming, with an rtx 2060.

5 REPLIES 5
Highlighted
Level 15
Level 15
11,083 10,894 1,124 3,241
Message 2 of 6
192
Flag Post
HP Recommended

CPU help

NO, you can only upgrade the Odense2-K motherboard with an Intel 7th gen cpu that runs at 65W.

So you can only upgrade to the i7 7700 (non K version). You cannot interchange INTEL with AMD CPUs.

 

Here is another thread that this was explained on...

https://h30434.www3.hp.com/t5/Gaming-Desktops/Cpu-upgrade/m-p/7186930#M6506

0 Kudos
Level 15
Level 15
11,083 10,894 1,124 3,241
Message 3 of 6
191
Flag Post
HP Recommended

CPU help

Capture.JPG

0 Kudos
Jugantic
New member
3 2 0 0
Message 4 of 6
176
Flag Post
HP Recommended

CPU help

How about with the i5 7600k?

0 Kudos
Jugantic
New member
3 2 0 0
Message 5 of 6
170
Flag Post
HP Recommended

CPU help

Could I just upgrade my motherboard to fit a ryzen 5 2600 or ryzen 5 1600 something along those lines? Except I dont know what I would have to look for. I know this would void the Warranty. 

0 Kudos
Level 15
Level 15
11,083 10,894 1,124 3,241
Message 6 of 6
160
Flag Post
HP Recommended

CPU help

I don't see why not, but I don't know of anyone who has actually done that type of upgrade. The case fits a micro ATX type motherboard. You will have to purchase a new copy of Windows also. The current one will not be transferable.

 

I don't have access to one of those 870's, so look on the back of the case and make sure the I/O Shield is removable (I'm pretty sure it is) to make sure you can add the new shield from the new motherboard.

The Case wiring for the power button, etc might not be standard and if not, you will have to take the time to rewire the connectors to fit the power pins on the new motherboard. I pretty sure that wont be necessary, just be aware of it in case you have to.

 

Personally, if you are going to spend that kind of money, I would want a new graphics card that has more VRAM that the 3GB 1060 has. If you need to swap that out also, you might as well build a new PC and use the Omen for the stream rig and the new PC for the gaming rig. All this swapping is not worth the trouble and cost in my opinion.

 

 

 

0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation