cancel
Showing results for 
Search instead for 
Did you mean: 
Andrew05
Level 1
4 2 0 0
Message 1 of 2
308
Flag Post

Solved!

Case Compatability

HP Recommended
HP Pavilion Gaming Desktop 690-00xx
Microsoft Windows 10 (64-bit)

Hi, I have a HP Pavilion gaming desktop, and want to upgrade the case soon for my birthday. I was looking at cases and realized the motherboard has to be compatible. I look up my motherboard which is a HP Sunflower 8433 with dimensions of 9.6 x 10.5 inches. These are custom dimensions and do not fit into any ATX category. How to I find out whether my case is compatible or not? I was specifically looking at the Corsair 220T Tempered Glass Mid-Tower Smart Case which is an ATX smart case. Thanks!

1 ACCEPTED SOLUTION

Accepted Solutions
wb2001
Level 15
Level 15
12,842 12,635 1,774 5,014
Message 2 of 2
Flag Post
HP Recommended

@Andrew05,

Although a "pretty case' it is not usable. It is non-ATX motherboard screw pattern.

Moving an HP to a new case     HP 690 is a proprietary PSU (NON-ATX wiring)

When you purchase a case,  it comes with special items that are not HP specific:

1) Rear I/O panel plate.  HP may not use an I/O pate in some models,. the case is cut to conform.

2) Front I/O power switch wire adapter. HP uses their own wiring scheme.

3) Rear is cutout for ATX PSU and mounting screw holes.  This is a unique PSU, NON-ATX.

This system is feedback driven thru Solution and Kudo flags. It's the only means of knowing if you have been served. Please click Accept as Solution, if your problem is solved. To say THANK YOU, press the "thumbs up symbol" to render a KUDO. You can render both Solution and KUDO..

HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
Printer -- HP OfficeJet Pro 8620 Legal
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 AMP Extreme 3 fan 8GB RAM, 500GB SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and 750W OCZ PSU.

View solution in original post

1 REPLY 1
wb2001
Level 15
Level 15
12,842 12,635 1,774 5,014
Message 2 of 2
Flag Post
HP Recommended

@Andrew05,

Although a "pretty case' it is not usable. It is non-ATX motherboard screw pattern.

Moving an HP to a new case     HP 690 is a proprietary PSU (NON-ATX wiring)

When you purchase a case,  it comes with special items that are not HP specific:

1) Rear I/O panel plate.  HP may not use an I/O pate in some models,. the case is cut to conform.

2) Front I/O power switch wire adapter. HP uses their own wiring scheme.

3) Rear is cutout for ATX PSU and mounting screw holes.  This is a unique PSU, NON-ATX.

This system is feedback driven thru Solution and Kudo flags. It's the only means of knowing if you have been served. Please click Accept as Solution, if your problem is solved. To say THANK YOU, press the "thumbs up symbol" to render a KUDO. You can render both Solution and KUDO..

HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
Printer -- HP OfficeJet Pro 8620 Legal
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 AMP Extreme 3 fan 8GB RAM, 500GB SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and 750W OCZ PSU.

View solution in original post

Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation