10-08-2019 08:20 PM
I'm sorry but English is not my native language.
I had in view that menu BIOS can be see under connected 1060 only then when is obtained in the course series of manipulation with its connecting nutrition. And the Windows operating system still booted from 1060.
10-08-2019 08:43 PM
So in other words, you could see the bios screen on the monitor, but only when you went thru the same process of disconnecting the 1660 power and connecting to the Integrated card?
If so, it sounds like a bios issue.
I don't know if you tried pulling the CMOS battery when you reset the bios. Maybe that will help?
Otherwise I don't have any other solution as you already updated it with the latest bios. Hopefully the other guys on the other forum section might be able to answer.
10-09-2019 05:38 AM
It is hard to follow what is happening.
I don't recall seeing any reference to disabling Secure boot and enabling Legacy support in the EFI BIOS (Link) before installing the graphics card.
I am also guessing the supplemental six pin PCIe power supply connection to power the graphics card has been done.
That's all I have on this?
10-09-2019 03:42 PM
yes. i pulling the CMOS battery when reset the bios.
yes. Secure boot is disabling and enabling Legacy support in the EFI BIOS
yes. the supplemental six pin PCIe power supply connection to power the graphics card has been done.
The situation at the moment is as follows. In order to start the system with 1060 it is necessary:
1) Switch DVI to built-in video card
2) to Start the system
3) when the system starts, log in using remote access and restart the PC.
4) during reboot, switch the DVI cable back to the card
5) if after rebooting the PC several times he turned on then turned off, the system starts with the card 1060
6) if after the first reboot not earned so as need to, then need to to do reboot through remote access until not start.
P S: at the same time, you do not need to disconnect the power from the card..
10-09-2019 07:37 PM
@Photoray002, @Grzwacz , according to the Illustrated Parts & Service Map, the latest date is 2012. If it was early 2012 it may not be UEFI as HP began using UEFI in mid-October, 2012. The 1060 definitely requires UEFI.
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
Custom build: Corsair 750D Airflow (Full Tower); MSI MEG z390 ACE; i9-9900K processor (OC'd 5.025); Corsair H150i cooler; 32 GB Corsair Vengeance Pro 3200 memory; MSI RTX 2080 Gaming X Trio video card; Samsung 970 Pro 512 GB; Samsung 860 EVO 1 TB
HP Spectre 360 Convertible; i7-7560U; 16 GB memory; Intel® Iris™ Plus Graphics 640; 512 GB PCIe® NVMe™ M.2 SSD; 13.3" diagonal 4K UHD UWVA eDP BrightView WLED-backlit multitouch-enabled edge-to-edge glass (3840 x 2160); Windows 10 Pro 64 with Windows Ink
HP Photosmart 7520 AIO
|**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**|
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.