My pc won’t output a signal after I overclocked the ram in bios

[Dinosaurx1]

My pc won’t output a signal to my monitor

[BeemerBiker]

Try a cmos reset

The "V" methodworks on some systems but not all

1. Turn off the computer.
2. Press and hold the Windows and the V keys.
3. While still pressing those keys, press and hold down the Power button on the computer for 2-3 seconds.
4. Release all the keys.
5. At the completion of a successful CMOS reset, a message showing CMOS Reset (502) will be displayed.
6. Restart the computer.

On some system hard reset clears the CMOS.

A hard reset should fix the problem

• Turn on the computer by holding the power button down for 20 full seconds then release.
• Press the Power button one more time (if necessary) to start the computer.
• Tap the ESC key about once a second after you see the LEDs on the keyboard flash.
• Press F2 to run diagnostics: (v) 2.6 or later is recommended.

Some desktop systems have a button you can push, others need the battery removed.

\Please provide the Product ID or exact model name for better assistance.