cancel
Showing results for 
Search instead for 
Did you mean: 
The HP Calculator Community Message Board is moving. While we prepare for the move, we are unable to accept new postings. During the move, you can look for help from other users by visiting https://www.hpmuseum.org/ . Or if you need technical support for your calculator visit: HP Calculators. .
WoKo1
New member
1 0 0 0
Message 1 of 4
1,701
Flag Post

Noise of fans of OMEN 30 L

HP Recommended
OMEN 30L with NVIDIA 3080
Microsoft Windows 10 (64-bit)

Hello,

just bought the new OMEN 30L 4 weeks ago, and I;m quite surprised about the noise of the fan and how quickly the temperature goes up. Sounds a bit like a hairdryer next to me.

Is there a solution to reduce the noise level? Guess the system is unable to cope with the new NVIDA card...

Thanks for help

3 REPLIES 3
hwsense
Level 6
434 414 24 135
Message 2 of 4
Flag Post
HP Recommended

Hi there, there is no solution, the I9 CPU runs extremely hot for the 120mm AIO and the fan needs to spin at very high RPMs to keep the temperatures relatively in control. The only real solution is migrating the internals to a better case and using at least 240mm AIO. I think HP didn't account for the excessive heat that the I9 is producing, that same stock AIO is working fine with the I5 and I7 versions. 

Was this reply helpful? Yes No
muxago
New member
1 1 0 0
Message 3 of 4
Flag Post
HP Recommended

there is a workaround (worked for me) for CPU

but the real problem is GPU. It is loud and memory modules are on 110C

I'm not sure what model is that to get a water cooler for it.

 

The details how to fix CPU

https://www.reddit.com/r/HPOmen/comments/kvo71a/omen_30l_i910850k_cooling/
You need to edit the registry to be able to see the turbo boost setting in windows.
Its not visible by default.

I undervolted the cpu by 100mv and its stable. For testing I used prime95 and intel burn test.
Since these are AVX tests the cpu gets really hot. Real world applications like games dont stress the cpu as much.

The 97c probably come from hitting 250w just after starting the test.
The fan still runs at idle mode and the cpu jumps to that temperature so fast the fan just can’t react in time.
If you run burn test or any other test you should watch for the average temperature.

Throttlestop needs to run in the background unfortunately.
There are no advanced settings in BIOS to set these values permanently.
I just created a task for throttlestop so it starts minimized when I log on.
Its a crutch, but it works.

Was this reply helpful? Yes No
Jykke
New member
1 1 0 0
Message 4 of 4
Flag Post
HP Recommended

I'm having i7-10070k with RTX 3080, and tried quite a few options (including switching from AIO into Noctua NH-U9S and reversing rear fan), but now I've settled with

- changing AIO fan into Noctua NF-F12 PWM  chromax.black (original fan is 4500 and is very noise when in full speed, Noctua is 1500 RPM max and still keeps radiotar cool)

- switched rear fan to Noctua NF-A9 PWM chromax.black

- undervolt CPU by -0.120v with Omen Desktop

- undervolt GPU into 806 mV/1815 MHz with MSI Afterburner

 

that's it! I don't think I'm loosing too much performance and there's night and day difference on the noise level vs the original setup.

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation