09-28-2018 02:37 PM
I had a failed liquid cooling CPU solution. I ordered a new part installed it and now the Cores are down to healthy range, 20-30 while they were in the 90's with the failed cooler. My problem is the fan for the CPU liquid cooling solution is just running at high. The fan starts out high on boot and onwards.
Is there something that has to be down in addition?
09-28-2018 02:43 PM
By the way I bought the fan from the HP parts store. P/N 855712-001 In stock Heatsink - Thermal, 135W Liquid Cooling, ID16 TYPH..
Just thought that the BIOS is not recoginizing the fan properly and thus defaults to telling the fan to run at high.
09-28-2018 03:00 PM
Additional things I have done:
1) updated to latest BIOS
2 ) reset BIOS to factory defaults
3) Hardware reset, Pull power for 30 secs then plug backin, then press and hold the Power button for 10+ secs.
I wonder whether I received a returned unit. I see that the fan's radiator fins are dented in a few places. Maybe wasn't right to start with.
09-29-2018 05:20 PM
Cpu FAN 4900-5000
PCI Fan 590
Hdd Fan 916
Top Fan none installed since I only have one graphic card, GeForce 1080
GPU is running at about 49 C.
Do note that the fan is on high when I even use the boot level Diagnostic tool and when I am in the BIOS.
09-29-2018 05:43 PM
Sorry but there is something wrong with that CPU fan and I have no idea what.
If you take a " 0 " off the RPM's it would be just about spot on???