-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Gaming
- Gaming Desktops
- Pc wont turn on

Create an account on the HP Community to personalize your profile and ask a question
01-02-2021 04:36 AM - last edited on 01-03-2021 11:44 AM by MarcusC
I was updating BIOS ( Downloaded on HP Official Website ), when i finish it ask me to restart my pc but after it turn off when it turning on it can't turn on, and turn off ( repeat ).
01-06-2021 02:32 PM - edited 01-06-2021 02:34 PM
@Alez, Welcome to the HP Support Community!
We reviewed your post and I understand that after the BIOS update notebook not powering on
Don’t worry, I assure you I will try my best to get this sorted.
I recommend you follow the below steps and check if it helps
Do you see a light at the place where the charger connects to the laptop? If yes then it indicates that the charger is all fine.
Was the Charger or Adaptor connected while updating the BIOS?
I recommend you to perform the following steps to isolate the issue and arrive at a fix:
- Remove the battery out. If the battery is integrated and does not have a latch to release it then leave the battery inside the laptop.
- Disconnected AC adapter from the laptop.
- Press and hold the power button for 15 seconds.
- Reconnect the battery and plug the AC adapter.
- Power ON the laptop.
- CMOS Rest (a combination of windows button and letter 'V' then push the power button ones and release the windows and letter 'V' after 5sec)
If the laptop does not power on then please continue with the below steps:
- Disconnect the charger and remove the battery out.
- Connect only the battery and check if the laptop powers on.
- Likewise, remove the battery out (if removal battery ) and connect only the charger and check if that helps
Hope this helps! Keep me posted.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!
Have a great day!