Ram upgrade omen obelisk

[Gigyyt]

Hi guys I want to upgrade my ram. My pc is an Omen Obelisk 875-0016nl. I upgraded it before with two sticks running at 2666mhz but they were cl16, and this mobo doesn't support it, because i was experiencing freezes and bsod. I want to ask you, will this ram, (3600mhz and cl18) run properly in my pc? https://www.amazon.it/dp/B07TB3R9JB/ref=cm_sw_r_cp_apa_i_zowvFbGGDP4P0

Or this?

https://www.amazon.it/dp/B083VMSY1B/ref=cm_sw_r_cp_apa_i_TwwvFbK3TJ0V9 

[banhien · Accepted solution]

@Gigyyt 

Its specs

             https://support.hp.com/au-en/document/c06354023

Which shows it has

HyperX 8 GB

• Amount: 8 GB
• Speed: PC4-21300 MB/s
• Type: DDR4-2666

and

Memory upgrade information

• Dual channel (1 DIMM per channel) memory architecture
• Two DDR4 UDIMM (288-pin) sockets
• Supports PC4-21300 (DDR4-2666)
• Supports 8 GB and 16 GB DDR4 UDIMMs
• Supports up to 4 GB on 32-bit systems
• Supports up to 32 GB (unbuffered) on 64-bit computers.

You can install 3200MHz or 3600MHz RAM but machine will automatically downgrade back to 2666MHz. It supports 32GB (2 x 16GB) max. You can use the following compatible RAM

          https://www.crucial.com/memory/ddr4/ct2k16g4dfd8266/ct15156854

or      https://www.crucial.com/memory/ddr4/bl2k16g32c16u4b/ct16838458

or      https://www.crucial.com/memory/ddr4/bl2k8g36c16u4b/ct16865404

Regards.

[Gigyyt]

Is the rgb option compatible?

[hwsense]

It is not. 

[Gigyyt]

The crucial ballistix rgb at 3200mhz is not compatible?

[hwsense]

As the expert mentioned above, the ram is compatible, but it will default to its stock clock speeds and you will not going to be able to control the RGB via HP OCC.