-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Gaming
- Gaming Desktops
- Re: Ram upgrade omen obelisk
Create an account on the HP Community to personalize your profile and ask a question
09-06-2020 04:33 PM - edited 09-06-2020 04:42 PM
Hi guys I want to upgrade my ram. My pc is an Omen Obelisk 875-0016nl. I upgraded it before with two sticks running at 2666mhz but they were cl16, and this mobo doesn't support it, because i was experiencing freezes and bsod. I want to ask you, will this ram, (3600mhz and cl18) run properly in my pc? https://www.amazon.it/dp/B07TB3R9JB/ref=cm_sw_r_cp_apa_i_zowvFbGGDP4P0
Or this?
https://www.amazon.it/dp/B083VMSY1B/ref=cm_sw_r_cp_apa_i_TwwvFbK3TJ0V9
Solved! Go to Solution.
Accepted Solutions
09-06-2020 05:48 PM
Its specs
https://support.hp.com/au-en/document/c06354023
Which shows it has
HyperX 8 GB
- Amount: 8 GB
- Speed: PC4-21300 MB/s
- Type: DDR4-2666
and
Memory upgrade information
- Dual channel (1 DIMM per channel) memory architecture
- Two DDR4 UDIMM (288-pin) sockets
- Supports PC4-21300 (DDR4-2666)
- Supports 8 GB and 16 GB DDR4 UDIMMs
- Supports up to 4 GB on 32-bit systems
- Supports up to 32 GB (unbuffered) on 64-bit computers.
You can install 3200MHz or 3600MHz RAM but machine will automatically downgrade back to 2666MHz. It supports 32GB (2 x 16GB) max. You can use the following compatible RAM
https://www.crucial.com/memory/ddr4/ct2k16g4dfd8266/ct15156854
or https://www.crucial.com/memory/ddr4/bl2k16g32c16u4b/ct16838458
or https://www.crucial.com/memory/ddr4/bl2k8g36c16u4b/ct16865404
Regards.
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
09-06-2020 05:48 PM
Its specs
https://support.hp.com/au-en/document/c06354023
Which shows it has
HyperX 8 GB
- Amount: 8 GB
- Speed: PC4-21300 MB/s
- Type: DDR4-2666
and
Memory upgrade information
- Dual channel (1 DIMM per channel) memory architecture
- Two DDR4 UDIMM (288-pin) sockets
- Supports PC4-21300 (DDR4-2666)
- Supports 8 GB and 16 GB DDR4 UDIMMs
- Supports up to 4 GB on 32-bit systems
- Supports up to 32 GB (unbuffered) on 64-bit computers.
You can install 3200MHz or 3600MHz RAM but machine will automatically downgrade back to 2666MHz. It supports 32GB (2 x 16GB) max. You can use the following compatible RAM
https://www.crucial.com/memory/ddr4/ct2k16g4dfd8266/ct15156854
or https://www.crucial.com/memory/ddr4/bl2k16g32c16u4b/ct16838458
or https://www.crucial.com/memory/ddr4/bl2k8g36c16u4b/ct16865404
Regards.
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.