• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
The HP Community is where owners of HP products, like you, volunteer to help each other find solutions.
HP Recommended
Omen Obelisk 875-0016nl
Microsoft Windows 10 (64-bit)

Hi guys I want to upgrade my ram. My pc is an Omen Obelisk 875-0016nl. I upgraded it before with two sticks running at 2666mhz but they were cl16, and this mobo doesn't support it, because i was experiencing freezes and bsod. I want to ask you, will this ram, (3600mhz and cl18) run properly in my pc? https://www.amazon.it/dp/B07TB3R9JB/ref=cm_sw_r_cp_apa_i_zowvFbGGDP4P0

Or this?

https://www.amazon.it/dp/B083VMSY1B/ref=cm_sw_r_cp_apa_i_TwwvFbK3TJ0V9 

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

@Gigyyt 

 

Its specs

 

             https://support.hp.com/au-en/document/c06354023

 

Which shows it has

 

HyperX 8 GB

  • Amount: 8 GB
  • Speed: PC4-21300 MB/s
  • Type: DDR4-2666

and

 

Memory upgrade information

  • Dual channel (1 DIMM per channel) memory architecture
  • Two DDR4 UDIMM (288-pin) sockets
  • Supports PC4-21300 (DDR4-2666)
  • Supports 8 GB and 16 GB DDR4 UDIMMs
  • Supports up to 4 GB on 32-bit systems
  • Supports up to 32 GB (unbuffered) on 64-bit computers.

You can install 3200MHz or 3600MHz RAM but machine will automatically downgrade back to 2666MHz. It supports 32GB (2 x 16GB) max. You can use the following compatible RAM

 

          https://www.crucial.com/memory/ddr4/ct2k16g4dfd8266/ct15156854

or      https://www.crucial.com/memory/ddr4/bl2k16g32c16u4b/ct16838458

or      https://www.crucial.com/memory/ddr4/bl2k8g36c16u4b/ct16865404

 

Regards.

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.




View solution in original post

5 REPLIES 5
HP Recommended

@Gigyyt 

 

Its specs

 

             https://support.hp.com/au-en/document/c06354023

 

Which shows it has

 

HyperX 8 GB

  • Amount: 8 GB
  • Speed: PC4-21300 MB/s
  • Type: DDR4-2666

and

 

Memory upgrade information

  • Dual channel (1 DIMM per channel) memory architecture
  • Two DDR4 UDIMM (288-pin) sockets
  • Supports PC4-21300 (DDR4-2666)
  • Supports 8 GB and 16 GB DDR4 UDIMMs
  • Supports up to 4 GB on 32-bit systems
  • Supports up to 32 GB (unbuffered) on 64-bit computers.

You can install 3200MHz or 3600MHz RAM but machine will automatically downgrade back to 2666MHz. It supports 32GB (2 x 16GB) max. You can use the following compatible RAM

 

          https://www.crucial.com/memory/ddr4/ct2k16g4dfd8266/ct15156854

or      https://www.crucial.com/memory/ddr4/bl2k16g32c16u4b/ct16838458

or      https://www.crucial.com/memory/ddr4/bl2k8g36c16u4b/ct16865404

 

Regards.

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.




HP Recommended

Is the rgb option compatible?

HP Recommended

It is not. 

HP Recommended

The crucial ballistix rgb at 3200mhz is not compatible?

HP Recommended

As the expert mentioned above, the ram is compatible, but it will default to its stock clock speeds and you will not going to be able to control the RGB via HP OCC. 

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.