cancel
Showing results for 
Search instead for 
Did you mean: 
RedlineTrucker
New member
4 2 0 0
Message 1 of 2
204
Flag Post

Upgrading GPU (870-275na)

HP Recommended
HP Omen 870-275na
Microsoft Windows 10 (64-bit)

Hello guys,

As I've been out of touch with upgrading and building pcs, regarding part compatibility, etc.
I wanted to find out if I can upgrade my 1070 gtx to a 1080ti in my 870-275na?
As the case is quite small, would able to fit it because of the size and will my 82F1 motherboard be compatible?

Thanks in advance. 

1 REPLY 1
Photoray002
Level 15
Level 15
12,666 12,443 1,306 4,291
Message 2 of 2
Flag Post
HP Recommended

Hello @RedlineTrucker 

 

You have two issues.

1  is easy... Simply look up the length of the card specs from the specific MFG you are purchasing from and take a tape measure and measure the inside of the case. You will see if it will fit or not. There are various versions of a card that vary in size from full to mini.

The power supply in it now shows 300w Mini ATX in your specs. You will have to upgrade this also, depending on what the requirements are from the video cards MFG also.

Those systems came with both a Mini ATX and Full ATX power supplies. Your 300w mini which will probably be installed with an adapter plate over the Full ATX screw hole pattern. Look to make sure the Full ATX screw hole pattern exists first.

 

This is a Standard (or Full) ATX pattern....

full atx psu pattern.jpg

 

 

 

Hope that helps.

 

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation