cancel
Showing results for 
Search instead for 
Did you mean: 
yobo2019
Level 3
34 28 2 3
Message 1 of 5
235
Flag Post

Will a 3rd party AIO fit my motherboard?

HP Recommended
Omen Obelisk 875-1040st
Microsoft Windows 10 (64-bit)

I have the Omen Obelisk 875-1040st and have found out that the cooling provided for the CPU is very far from being enough for the i9 9900k (They only provide a single 120mm AIO). I would like to take all of the internals and put them in a new case that will be able to have a larger AIO, but will the MB cutouts fit the standard AIO mounts?

4 REPLIES 4
wb2001
Level 15
Level 15
12,842 12,635 1,773 5,013
Message 2 of 5
Flag Post
HP Recommended

@yobo2019 

You some serious issues. Besides this document, you would have to make the rear I/O panel.

https://h30434.www3.hp.com/t5/Gaming-Knowledge-Base/Moving-HP-Motherboard-to-a-new-gaming-case/ta-p/...

This system is feedback driven thru Solution and Kudo flags. It's the only means of knowing if you have been served. Please click Accept as Solution, if your problem is solved. To say THANK YOU, press the "thumbs up symbol" to render a KUDO. You can render both Solution and KUDO..

HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
Printer -- HP OfficeJet Pro 8620 Legal
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 AMP Extreme 3 fan 8GB RAM, 500GB SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and 750W OCZ PSU.
0 Kudos
yobo2019
Author
Level 3
34 28 2 3
Message 3 of 5
Flag Post
HP Recommended

Why would I have to make a new rear I/O? I was asking about the mounts for an AIO system so I can at least get average performance.

0 Kudos
wb2001
Level 15
Level 15
12,842 12,635 1,773 5,013
Message 4 of 5
Flag Post
HP Recommended

@yobo2019

Did you read the link?

There is NO guarantee the mounting screw pattern will match the stand-offs of another case.

This system is feedback driven thru Solution and Kudo flags. It's the only means of knowing if you have been served. Please click Accept as Solution, if your problem is solved. To say THANK YOU, press the "thumbs up symbol" to render a KUDO. You can render both Solution and KUDO..

HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
Printer -- HP OfficeJet Pro 8620 Legal
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 AMP Extreme 3 fan 8GB RAM, 500GB SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and 750W OCZ PSU.
0 Kudos
yobo2019
Author
Level 3
34 28 2 3
Message 5 of 5
Flag Post
HP Recommended

Yes I did read it. But I am talking about the mount for an All In One water cooler. Not the standoffs for the motherboard. I was wondering if HP uses a standard mounting configuration for their AIOs or not.

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation