Will this RAM fit my Omen Obelisk?

[Coffee2222]

Computer: Omen Obelisk OMEN OBELISK DESKTOP PC - 875-1040ST 

Model #: 6FH15AV 

Reference Image: https://ibb.co/PWGfzLj

Current RAM Memory: 

Memory slot 1

16GB Kingston 2666MHz

Memory slot 2

16GB Kingston 2666MHz

Hey Guys, 

Will this 16GB RAM fit my Omen Obelisk? I've got two extra DIM slots and I want to use them. 

https://www.amazon.com/Kingston-Technology-HyperX-HX426C16FRK2-32/dp/B06XKSPW5V/ref=asc_df_B06XKS3SC...

[Photoray002]

Hello again @Coffee2222 

Technically it should run ok. The Shire motherboard is setup with 4 mem slots using dual channel.

As an extra measure, I like to install all sticks that match and have the same timings. So I would run a tool like CPUz or Speccy and take a look at the frequencies of the existing ram and match the other two.

The above rams timings you linked are DDR4-2666 CL16  16-18-18 @1.2V

[Coffee2222]

interesting thanks. I will run the test, but physically they will plug in okay? Like number of pins? 

[Photoray002]

Your model uses DDR4  and the Kingston ram you pointed to is also DDR4, so yes it will physically fit.

😉

[londer]

Photoray, for the Shire motherboard, if using 2 sticks of 16 gig ram, which slots do I put them in?

I currently put them in Dimm1 and Dimm3, I do not see different colors and can not find any information on this.

Thanks in advance

[Photoray002]

Generally the rule of thumb is to start at the one closest to the CPU.

IF you are not experiencing problems, you should be good.

I dont find any actual documentation on the slots either.