cancel
Showing results for 
Search instead for 
Did you mean: 
AussieLambchops
New member
1 0 0 0
Message 1 of 2
172
Flag Post

Solved!

Expansion Slots on OMEN 17-cb0061tx

HP Recommended
Omem 17-cb0061tx
Microsoft Windows 10 (64-bit)

Hi guys,

I am looking at purchasing the Omen 17-cb0061tx and have been trying to search regarding the available slots for the following:

1. RAM - How many SODIMM modules can the system take

2. Is there a second NVMe M.2 SSD slot

3. Is there a SATA 2.5' expansion slot/bay.

 

From my initial searching it looks like there is room for a 2.5' SATA drive, but I can't work out the others.

 

Any help would be greatly appreciated.

Thank you!

1 ACCEPTED SOLUTION

Accepted Solutions
banhien
Level 19
Level 19
92,809 92,687 12,001 25,586
Message 2 of 2
Flag Post
HP Recommended

@AussieLambchops 

 

Its specs

 

   https://support.hp.com/au-en/document/c06422976

 

  1. It has 2 slots of RAM and supports 64GB. It has 16GB now, you can add SAME 16GB to slot 2 to make 32GB . HP uses many supliers but I believe your machine uses Samsung RAM.  I can't find 32GB x 2. 
  2. If has 512 GB PCIe® NVMe™ M.2 SSD now, the M,2 slot is occupied already
  3. Yes, it has 2.5" bay for 2.5" HDD/SSD but you need to have hard drive connector/cable part # L57362-001 which is N/A as shown https://partsurfer.hp.com/Search.aspx?searchText=L57362-001

Regards.

 

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.



View solution in original post

1 REPLY 1
banhien
Level 19
Level 19
92,809 92,687 12,001 25,586
Message 2 of 2
Flag Post
HP Recommended

@AussieLambchops 

 

Its specs

 

   https://support.hp.com/au-en/document/c06422976

 

  1. It has 2 slots of RAM and supports 64GB. It has 16GB now, you can add SAME 16GB to slot 2 to make 32GB . HP uses many supliers but I believe your machine uses Samsung RAM.  I can't find 32GB x 2. 
  2. If has 512 GB PCIe® NVMe™ M.2 SSD now, the M,2 slot is occupied already
  3. Yes, it has 2.5" bay for 2.5" HDD/SSD but you need to have hard drive connector/cable part # L57362-001 which is N/A as shown https://partsurfer.hp.com/Search.aspx?searchText=L57362-001

Regards.

 

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.



View solution in original post

Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation