HP Omen DC0084TX compatible SSD and Ram

[Perumal_1234]

Hi i am using HP OMEN DC0084TX for the past 6 months, found ssd is 128gb toshiba kbg30zmv which is PCIe3*2/NVMe  and ram i am not sure what they used. So here i would like to upgrade my Ram & SSD to below components since the performance is not enough.  kindly let me know if the below components are compatible.

1.a. Corsair force MP510 PCIe Gen 3.0 x4 M.2 2280 3D TLC NAND (Only M key / single notch).

1.b. Western Digital WDS256G1 pcie Gen 3*4 NVMe SD 3.3v 2.5A (Only M key / single notch).

2. Hyperx impact 2*16gb ddr4 so-dimm 2666mhz dual channel, 260 pin 1.2v Ram.

Please suggest me, i am planning to upgrade in 1 or 2 days.

Thanks

[Perumal_1234]

can someone please let me know the compatibility.

[Riddle_Decipher]

@Perumal_1234 Here's the list of parts tested and approved by HP to be compatible with your device:

And how you can replace them, as well:

For details on upgrading or replacing RAM: click here and visit page. 40 - 41 of Chapter 5 Removal and replacement procedures for Customer Self...

P.S: Welcome to HP Community 😉

Let me know how that pans out,

If you feel I was helpful, simply click on Accept as Solution to help the community grow,

That said, I will have someone follow-up on this to ensure you've been helped,

Just in case you don't get back to us within 24 - 48hrs, and have a good day, ahead.

[Perumal_1234]

Hi riddle,

I would like to know the specification of components.  like below

1. Ram = # volts, # Amp, # no of pin, Latency, Speed.

2. SSD = No of keys (M / B) Storage, data transfer, # volts, # amp..

If you want i can share the details of corsair ssd and hyperx ram details to validate the compatibility.

Thanks

[sandytechy20]

@Perumal_1234

Yes, share those details for further assistance.

Cheers.