cancel
Showing results for 
Search instead for 
Did you mean: 
ramamurthyeee
Level 1
7 5 1 0
Message 1 of 2
187
Flag Post

Hi sir/mam installed M.2 SSD working well but not showing bios for bootable

HP Recommended
Hp 15 bs675tx(bs0xx)
Microsoft Windows 10 (64-bit)

Hi sir/mam  i have installed new samsung 860 evo M.2 Sata SSD an also installed windows 10, but when shutdown an on always asking to boot menu, an also in bios boot option not listed this SSD showing only hard drive if i can change legacy enable I'll be boot windows otherwise it will be asking every time boot menu when i restart kindly help...

Thanks in advance

1 REPLY 1
Riddle_Decipher
HP Support Agent
HP Support Agent
31,166 30,826 2,619 4,015
Message 2 of 2
Flag Post
HP Recommended

@ramamurthyeee Namaste, that's the extent of my Sanskrit. 😉

Greetings from the HP Community!

 

I suggest you follow these steps to disable Secure Boot:

  1. Turn off the computer.

  2. Press the power button to turn on the computer, and immediately press Esc repeatedly, about once every second, until the Startup Menu opens.
     

    Figure : Startup Menu

    Startup Menu
     
  3. Press F10 to open BIOS Setup.

  4. Use the right arrow key to choose the System Configuration menu, use the down arrow key to select Boot Options, then press Enter.
     

    Figure : Boot Options selection in the System Configuration window

    Boot Options selection in the System Configuration window
     
  5. Use the down arrow key to select Secure Boot, press Enter, and then use the down arrow key to modify the setting to Disabled.
     

    Figure : Secure Boot: Disabled

    Secure Boot: Disabled
     
  6. Press Enter to save the change.

  7. Use the left arrow key to select the File menu, use the down arrow key to select Save Changes and Exit, then press Enter to select Yes.

  8. The Computer Setup Utility closes and the computer restarts. When the computer has restarted, the Operating System Boot Mode Change screen appears, prompting you to confirm the Boot Options change. Type the code shown on the screen, then press Enter to confirm the change and continue to Windows.

For more details: click here

 

Keep us posted,

If you would like to thank us for our efforts to help you, 

Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 

Have a great day!

Riddle_Decipher
I am an HP Employee

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation