cancel
Showing results for 
Search instead for 
Did you mean: 
G_Kartheek
New member
1 0 0 0
Message 1 of 2
125
Flag Post

My laptop is showing error '3F0

HP Recommended
Hp pavilion gaming laptop dk-0049TX
Microsoft Windows 10 (64-bit)

How to fix error '3F0'   Boot Device Not Found. Please install an operating system on your hard disk.

for  a gaming laptop of dk series ,  It may be because I cleared all my data in HDD drive keeping SSD  undisturbed .

how to fix this error if it is caused by above scenario

1 REPLY 1
Lil_Boy_Blue
Level 12
7,692 7,654 332 704
Message 2 of 2
Flag Post
HP Recommended

Hi
First:- Turn off the computer, press and hold the PWR button for 4 seconds.

Then - Leave only keyboard and mouse connected, disconnect all externally connected
devices such as Docking Station, USB storage devices, displays, and printers.
Unplug the AC adapter from the computer.

Next - Press and Hold the Power button for 15 seconds to Hard Reset.
Rinse and Repeat; Re-Connect the AC adapter.

NOW begin checking/testing/proving the Hardware is fit for purpose.
Power on your PC, press ESC (repeatedly), then F2 at the prompt.
Choose System Tests (Fast Test does a 4 minute hardware check).
AND/OR
HOW DO I USE DIAGNOSTICS?

HP PC Hardware Diagnostics Windows is a Windows-based utility that allows you to run diagnostic tests to determine if the computer hardware is functioning properly. The tool runs within the Windows operating system in order to diagnose hardware failures. HP PC Hardware Diagnostics Windows comes pre-installed on new HP computers, but if not on yours, download here:-
https://www8.hp.com/us/en/campaigns/hpsupportassistant/pc-diags.html

 

~~~~~~~~~~~From 2016 onwards there is a possible recovery option via the cloud...
HP Consumer PCs - Using the HP Cloud Recovery Tool (Windows 7 & 10)
https://support.hp.com/us-en/document/c06162205
OR
This First part only works when a valid Recovery Partition is enabled.

If it displays an error message then move onto the Second part,
OR if you have data you wish to try and save using the XCOPY command.
Then create your own Repair/Recovery/Rebuild/Re-install media or buy a set from HP.

Turn off the computer.

Disconnect all connected devices and cables, Media Drives, USB drives, printers, & faxes.
Remove media from internal drives, and remove any recently added internal hardware.
Do not disconnect the monitor, keyboard, mouse, or power cord.

Turn on the computer and repeatedly press the F11 key, about once every second,
until the Choose an option screen is displayed, and then continue.

On the Choose an Option screen, click Troubleshoot, and work your way through the screens.

Second Part:-
This may require another PC. Find and Download your .iso from…

https://www.microsoft.com/en-us/software-download/windows10
Expand/Extract/Burn the iso Image onto a DVD/USB as needed.
Microsoft’s Creator Tool will make the required DVD or USB.

W8 Repair.pngRecovery Reinstall.png
NB: - W10 Begin with the Automatic Repair, then Startup Settings etc.

From either the C:\ or the X:\ prompt try the following

cd boot
bootrec /FixMBR
bootrec /FixBoot
bootrec /RebuildBCD

If the above FAILS then please try:-

http://www.thewindowsclub.com/install-windows-10-from-usb

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation