cancel
Showing results for 
Search instead for 
Did you mean: 
austmills
Level 1
2 1 1 0
Message 1 of 2
1,476
Flag Post

Solved!

Non responsive Omen X 17 after attempting overclocking with Command Center

HP Recommended
HP Omen X 17 Laptop Model 17-ap020nr
Microsoft Windows 10 (64-bit)

hello all, not experienced in overclocking. I thought I would try the “intelligent” mode in Omen Command Center. It attempted to overclock numerous times, hanging at 40% complete, rebooting many many time. I assumed this was part of the process. Eventually made it to 80% then the same cycle. Finally it made it to 80% and stayed more stable working its way up to (I think) 100%. Some screens flashed really quickly and it rebooted. Now I cannot get anything to happen on reboot in terms of the built-in display or an external display. I am trying to enter bios or get any reaction at all and I get nothing. Any suggestions out there? 
Edit: I should clarify that I hear fans running (low) and the keyboard and case lights but that is all. 

1 ACCEPTED SOLUTION

Accepted Solutions
austmills
Author
Level 1
2 1 1 0
Message 2 of 2
Flag Post
HP Recommended

With HP tech's help, pulled the battery, power drained, back up and running. Thought it was a long shot but it worked.

View solution in original post

0 Kudos
1 REPLY 1
austmills
Author
Level 1
2 1 1 0
Message 2 of 2
Flag Post
HP Recommended

With HP tech's help, pulled the battery, power drained, back up and running. Thought it was a long shot but it worked.

View solution in original post

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation