SIR I AM GETTING THIS ERROR while i am try to start my graphic card

[HARSHKINNG]

( Catalyst Control Center cannot be started. there are currently no settings that can be configured using catalyst control center ) please help me to resolve this problem  , please some one provide me the resolution step by step  how to make this good

[Jeet_singh]

@HARSHKINNG,

Thank you for posting your query on HP Support Community,

Let's start off by performing a Hard reset on the notebook: 

Before power resetting your computer, do the following:

1. Disconnect or remove all peripheral devices. Start up the laptop and test the computer by itself, and then reconnect one peripheral device at a time.

2. Turn over the computer and look for a battery compartment door.

   • If there is a battery compartment, use the steps in Reset a laptop with a removable battery.

   • If there is no battery compartment, use the steps in Reset a laptop with a sealed or non-removable battery.

 I recommend to restore the BIOS defaults.You could restore the BIOS with this document selecting the reloading the BIOS default settings. That way it will look at the Hardware installed on the Notebook.

Once done, restart the computer and check.

Next thing, I would suggest here is to Run Windows Updates troubleshooter -

Download and install the troubleshooter from this link.

Now try to perform Windows Updates - 

1) In the search box, type and open Windows Updates. 
2) Check for updates. 
3) If the updates are available, click on install and restart the computer. 

If the issue persists, I would suggest here is to uninstall the display drivers on your PC from device manager.

Right-Click on start button> click device manager> expand display adapters>then select the display drivers that are listed and right-click on it and uninstall the drivers.

Check the box that states delete the software for this device.

Now restart the computer and then update the Bios, Chipset and graphics card drivers on your PC either from our HP support website, using this link or download it using HP Support Assistant

Download and install HP support assistant on your PC. It should automatically download and install the latest updates and drivers for your PC.

Refer this link to know how to use HP support assistant.

Could you please respond to this post with the details and with the results of the troubleshooting as this will help me in further assisting you.

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that'll help us and others see that we've got the answers!

Have a great day!