• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
HP Recommended
hp pavilion gaming laptop - 15-dk1009ne
Microsoft Windows 10 (64-bit)

I'm trying to set my laptop to limit its battery charge.  There's a solution listed under Gaming Laptops (Configuring battery charging limit to desired value (70-80%) on HP laptop), unfortunately, both before and after updating my BIOS, the System Configuration/Battery Care Function option of limiting charge is absent.

1 REPLY 1
HP Recommended

Hi@LordX127,

 

I understand that you have an HP Notebook 1and the battery charges till 70% and then stops. You've done a remarkable job performing the steps. 

 

Did any software changes or updates happen on your laptop after which the battery stopped charging at 70%?

 

While you respond to that, I recommend you to perform the following steps to isolate the issue and arrive at a fix: 

NOTE: You may skip any steps that have been performed by you already.

  • Power off the laptop.
  • Remove the battery out. If the battery is integrated and does not have a latch to release it then leave the battery inside the laptop.
  • Disconnected AC adapter from the laptop.
  • Press and hold the power button for 15 seconds.
  • Reconnect the battery and plug the AC adapter.
  • Power ON the laptop.

Now let us uninstall the battery drivers and reinstall them. The following steps will help:

  • Open the device manager. 
  • Expand "Batteries". Right click on the ACPI battery drivers and select uninstall. If there are multiple entries of the ACPI battery drivers then uninstall them all.
  • Close the device manager.Restart the laptop.
  • The Windows operating system will reinstall the battery drivers while restarting. 

It is a good idea to download and run a BIOS update for your laptop via this link. The charger must be connected until the BIOS update is complete to avoid any power interruptions due to the battery draining out. 

 

Post a successful BIOS update,  you may check if the battery charges fully. If not then please perform the steps as described in detail in this HP document. These steps help in testing and calibrating the battery. 

NOTE: Please skip the steps mentioned in "Test and calibrate the battery using HP Support Assistant".

 

I sincerely hope this fixes the issue. Keep me posted. 

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Have a great day! 

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.