cancel
Showing results for 
Search instead for 
Did you mean: 
punkazotox
New member
1 0 0 0
Message 1 of 2
2,722
Flag Post

graphic gtx1050 4gb

HP Recommended
hp omen 15
Microsoft Windows 10 (64-bit)
my laptop is not working properly
graphics performance is very below normal
every movie, game or animation has short stops at equal intervals
graphics warm up at the least demanding gamesI cleaned the laptop and changed the thermal grease
it did nothing
 
1 REPLY 1
sandytechy20
HP Support Agent
HP Support Agent
26,785 26,658 1,466 1,536
Message 2 of 2
Flag Post
HP Recommended

@punkazotox

 

Welcome to HP support community.

 

Let's start with performing a hard reset on the PC to release any excessive static/power that could have caused the issue. 

  • Turn off the computer. 
  • Disconnect all external connected peripheral devices such as USB storage devices, external displays, and printers. 
  • Unplug the AC adapter from the computer. 
  • Press and hold down the Power button for about 15 seconds to drain any residual electrical charge from the capacitors that protect the memory. 
  • Press the Power button to turn on the computer. 
  • If a startup menu opens, use the arrow keys to select Start Windows Normally, and then press the Enter key. 

Second, you can check if there is Bios update available for your PC, here is the link to download. 

Performing a test on the Hard drive as well as on the Memory from the Hardware diagnostics:  

  1. Hold the power button for at least five seconds to turn off the computer.

  2. Turn on the computer and immediately press Esc repeatedly, about once every second. When the menu appears, press the F2 key.
  3. On the HP PC Hardware Diagnostics (UEFI) main menu, click System Tests.

  4. Click Extensive Test.

  5. Click Run once, or Loop until error.

    While the test is running, the time remaining and test result for each component are shown on the screen. The test can take 2 or more hours to complete.

   NOTE:To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others

If the diagnostics are not available when using the F2 menu, run the HP PC Hardware Diagnostics from a USB drive. To download the latest version of the diagnostics, go to the HP Hardware Diagnostics website. For instructions, see Testing from an external USB device.

 

The best way to resolve the issue is by using the HP Guided Troubleshooter: 

CLICK HERE FOR STEP BY STEP GUIDE (Scroll to the bottom for more options)

(simply select your description of the issue from the bottom of the screen to gain access to the next set of steps that should resolve your concern).

 

I hope that helps.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.

Sandytechy20
I am an HP Employee

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation