• ×
    Information
    Windows update impacting certain printer icons and names. Microsoft is working on a solution.
    Click here to learn more
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Windows update impacting certain printer icons and names. Microsoft is working on a solution.
    Click here to learn more
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Do you need the WPS PIN to connect your printer? Click here for tips and tricks!
Check some of the most frequent questions about Instant Ink: HP INSTANT INK, HP+ PLANS: INK AND TONER.


Check out our WINDOWS 11 Support Center info about: OPTIMIZATION, KNOWN ISSUES, FAQs AND MORE.
HP Recommended
HP 8610
Microsoft Windows 10 (64-bit)

I have a blue screen on my printer with the number 068CC413. I've seen responses to other users who have had this problem,

but resetting the router, and restarting everything doesn't help. I've let it sit for months and decided to try again. I had read a while back to connect the printer to the laptop, and did that today... but again I'm clueless. Any help out there?

3 REPLIES 3
HP Recommended

@Uttley

Welcome to HP Forums, 

This is a great place to get support, find answers and tips to your technical queries.

 

To provide you with an accurate solution, I'll need a few more details:

Check if the carriage is moving freely?

Remove the cartridge and check what is the error message.

Any hardware changes made on the printer?

How is the printer connected? (Wired/wireless)

Make sure there is no jam in the printer?

 

I suggest you do a Hard Reset

 

(1) Turn the printer on, if it is not already on.

(2) Wait until the printer is idle and silent before you continue.

(3) With the printer turned on, disconnect the power cord from the rear of the printer.

(4) Unplug the power cord from the wall outlet.

(5) Wait at least 60 seconds.

(6) Plug the power cord back into the wall outlet.

NOTE: HP recommends connecting the printer power cord directly to the wall outlet.

(7) Reconnect the power cord to the rear of the printer.

(8) Turn on the printer, if it does not automatically turn on.

 

The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.

Wait until the warm-up period finishes and your printer is idle and silent before you proceed.

 

Keep me posted,

Have a great day!

Cheers:)

Raj1788
I am an HP Employee 

HP Recommended

Hi, I have the same problem. I tried the above reset. This doesn't work for me. Do you have another suggestion?

HP Recommended

@Edje69

 

If the Power reset didn't help, try updating the printer Firmware

 

You can refer to this Link: https://support.hp.com/in-en/document/c02919168

 

If the issue persists please contact HP Support for Service Options

 

Click on this link - www.hp.com/contacthp/ and select your Country to get the Contact details for HP Support

 

If the information I've provided was helpful, give us some reinforcement by clicking the "Solution Accepted" on this Post and it will also help other community members with similar issue.
 

KrazyToad
I Am An HP Employee

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.