cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
New member
1 0 0 0
Message 1 of 2
113
Flag Post
HP Recommended

Printer pinhead issue

Officejet Pro 8610
Microsoft Windows 10 (64-bit)

I got this message, pinhead appears to be missing, not detected, or incorrectly installed. Is there some way to test the current pinhead to see if it is working before replacing it?

1 REPLY 1
HP Support Agent
HP Support Agent
19,140 19,043 1,091 1,181
Message 2 of 2
46
Flag Post
HP Recommended

Printer pinhead issue

@Josh45933

 

Welcome to HP support community.

 

Perform a power reset

  1. Turn on the printer, if it is not already on.
  2. Wait until the printer is idle and silent before you continue.
  3. With the printer turned on, disconnect the power cord from the rear of the printer.
  4. Wait at least 30 seconds.
  5. Plug back the power cable straight to a wall outlet and printer without any surge protector.
  6. Turn on the printer.

Try the steps mentioned in this HP document to fix this issue:- Click here

 

I hope that helps.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.

Sandytechy20
I am an HP Employee

0 Kudos
Be alert for scammers posting fake support phone numbers on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation