cancel
Showing results for 
Search instead for 
Did you mean: 
zaheerekpk
New member
4 3 0 0
Message 1 of 8
285
Flag Post
HP Recommended

connection error check connection when trying to enable

hp laserjet 100 color MFP M175nw
Microsoft Windows 10 (32-bit)

I have recently configured my printer over my home wired network. printer is successfully setup and we start printing via pc and mobiles etc.

when we go to enable webservices for eprint it gives error "Connection error Check Connection" . Though our printer is connected to network and printing as well. also note that a file download was also failed when we were trying to enable eprint just after the driver download.

please help.

7 REPLIES 7
HP Support Agent
HP Support Agent
4,851 4,839 255 201
Message 2 of 8
241
Flag Post
HP Recommended

connection error check connection when trying to enable

@zaheerekpk

 

Welcome to the HP Support Community.

 

Let's restart the Router, Printer and the Computer in this sequence:

  1. Turn off the router by pressing the power button or disconnecting the power cord.

  2. Turn off the printer.

  3. Close all running programs on your computer, and then shut down the computer.

  4. Press the power button or reconnect the power cord to the router, and then wait for the Internet activity light to display a normal connected status.

  5. Turn on the printer.

  6. Turn on the computer.

  7. Try to turn on Web Services.

If the issue persists, please perform the remaining steps from this document: https://support.hp.com/in-en/document/c05337026

 

Let me know if this helps.

 

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution button, that'll help us and others see that we've got the answers!

 

Thanks!

Have a great day!


I am an HP Employee

Reply
0 Kudos
zaheerekpk
New member
4 3 0 0
Message 3 of 8
200
Flag Post
HP Recommended

connection error check connection when trying to enable

HI,

 

thanks for your help but unfortunately i am still unable to setup eprint. the web services couldn't be turned on " Connection error check connection". though i am able to print from the laptop and mobile using wifi but the printer is connected via ethernet on same router.

 

can you please help???

regards,

Zaheer

Reply
0 Kudos
HP Support Agent
HP Support Agent
4,851 4,839 255 201
Message 4 of 8
184
Flag Post
HP Recommended

connection error check connection when trying to enable

I hope you have followed these steps to set up eprint: https://support.hp.com/in-en/document/c03609576

 

Let me know if this helps.

 

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution button, that'll help us and others see that we've got the answers!

 

Thanks!


I am an HP Employee

Reply
0 Kudos
zaheerekpk
New member
4 3 0 0
Message 5 of 8
141
Flag Post
HP Recommended

connection error check connection when trying to enable

no! it doesn't. i am not able to even find the printer code from web services page. as i told you earlier that printing is done but i am unable to setup eprint. when i press the enable i get theCapture.JPG attached error. 

Reply
0 Kudos
Tags (1)
HP Support Agent
HP Support Agent
17,767 17,757 1,179 1,834
Message 6 of 8
113
Flag Post
HP Recommended

connection error check connection when trying to enable

@zaheerekpk

 

I recommend you follow the steps in the below article and check if it helps.

 

https://support.hp.com/us-en/document/c03721293

 

If you wish to show appreciation for my efforts, mark my post as Accept as Solution. Your feedback counts!

 

Cheers!

The_Fossette
I am an HP Employee

Reply
0 Kudos
zaheerekpk
New member
4 3 0 0
Message 7 of 8
77
Flag Post
HP Recommended

connection error check connection when trying to enable

Hi,

Thanks! it really doesn't help. As i shared the screenshot that I've not able to enable e print, it gives me subject error.

 

connected to network, printing perfectly, connecting to pc via IP address except enable e print.

 

Reply
0 Kudos
HP Support Agent
HP Support Agent
17,767 17,757 1,179 1,834
Message 8 of 8
55
Flag Post
HP Recommended

connection error check connection when trying to enable

@zaheerekpk

 

I recommend you contact support to further diagnose the issue.

 

Here is how you can get in touch with support.

 

1)Click on this link – www.hp.com/contacthp/

2)Select the product type.

3)Enter the serial number of your device or select let HP detect your product option.

4)Select the country from the drop-down.

5)You should see the HP phone support number or Chat option listed.

 

Cheers!

The_Fossette
I am an HP Employee

Reply
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation