CHANGE INK CARTRIDGES IN 9015

[FAL1]

HOW TO CHANGE INK CARTRIDGES FOR INK JET PRO 9015

[TEJ1602]

@FAL1, Welcome to HP Support Community!

Replace the ink cartridges

Replace any low or empty ink cartridges.

1. Turn on the printer.

2. Open the ink cartridge access door.

   The carriage moves to the center of the printer.

3. Wait until the carriage stops moving before you continue.

4. Push in on the front of the ink cartridge to release it, and then pull it toward you to remove it from its slot.

   

5. Remove the new ink cartridge from its package.

6. Hold the new ink cartridge so that the ink cartridge contacts face the printer.

7. Slide the new ink cartridge into its slot, and then gently push it forward until it snaps into place. Make sure the letter on the ink cartridge matches the letter on the slot.

     caution:

   Do not lift the latch handle on the carriage to insert ink cartridges. Doing so could cause the printhead or ink cartridges to be incorrectly seated, which could damage the print mechanism and cause printing problems.

   

8. Repeat these steps to install any other new ink cartridges.

9. Close the ink cartridge access door.

Refer to the document Replacing Ink Cartridges for additional help if required.

Hope this helps! Keep me posted. 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!