Cancel Instant ink..

[KikiEdis]

Why after I cancel the instant ink, I cannot use my printer with new cartridge ? Because I still want use my printer without instant ink. I already used it for 4 years, get 1 pair of cartridge  for 4 year and it's only wasting money because it's only  maintain and monitor my usage. So I want to cancel it, use the new cartridge. But my printer not working. Please help me to use my printer again without instant ink!!

Thank you so much,

Kiki

[TEJ1602]

@KikiEdis, Welcome to HP Support Community!

HP Instant Ink cartridges do not work after the end of your current billing period, and you are required to return them to HP. To continue printing after your billing cycle ends, make sure you have standard replacement ink cartridges ready to use in your printer. Also, if one of the ink cartridges is from Instant Ink and another one is regular, the printer will still throw an error.

If you still have issues after following the instructions above follow the steps below-

Update the printer firmware

Download available firmware updates from the HP website

With the printer on and connected to the computer, go to HP Customer Support - Software and Driver Downloads, and then identify your printer. Look for and install any available firmware updates. Refer to the document HP Printers - Updating or Upgrading Printer Firmware

Try these steps to re-enable the web-services -

Step 1 Remove the Web-Services -

1. From the top of the screen, touch or swipe down the tab to open the Dashboard, touch ( HP ePrint ), and then touch (Web Services Settings).

2. Touch Remove Web Services.

Reboot the devices.

Step 2 Enable the Web-Services -

1. From the top of the screen, touch or swipe down the tab to open the Dashboard, and then touch ( Setup ).

2. Touch Web Services Setup .

3. Touch Accept to accept the Web Services terms of use and enable Web Services.

4. On the screen that appears, touch OK to allow the printer to automatically check for product updates.

5. If the Printer Update Options screen is displayed, select one of the options.

6. When the printer is connected to the server, the printer prints an information page. Follow the instructions on the information page to finish the setup.

Hope this helps! Keep me posted. 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!