• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
The HP Community is where owners of HP products, like you, volunteer to help each other find solutions.
Common problems for INSTANT INK, HP+ PLANS: INK AND TONER
We would like to share some of the most frequently asked questions about Instant Ink. Check out this link: HP INSTANT INK, HP+ PLANS: INK AND TONER. .
Locked

‎09-02-2020 07:49 AM

HP Recommended
Product: OfficeJet 4650

HP OfficeJet 4650 issue: level of colour ink full but doesn't print in colour. Black colour wears out too quickly.

1 REPLY 1

‎09-04-2020 09:11 AM

HP Recommended

@Sambrotta, Welcome to the HP Support Community!

 

Try making a standalone copy in color and check if that works. By this, we can conclude if this is a hardware or a driver issue.

 

Reset the printer

  1. With the printer turned on, disconnect the power cord from the rear of the printer.
  2. Wait at least 60 seconds.
  3. Reconnect the power cord to the rear of the printer.
  4. Turn ON the printer, if it does not automatically turn on.
  5. Wait until the printer is idle and silent before you proceed.

Note: HP recommends connecting the printer directly to a wall outlet rather than a surge protector or a power strip.

 

Update the printer firmware

Click here to know different methods of updating printer firmware.

 

Remove the black ink cartridge. Clean the color ink cartridge.

  1. On the printer control panel, swipe the display to the left, then touch Setup.

  2. Touch Tools, then touch Clean Cartridges.

  3. If the print quality is unacceptable, click Yes when prompted to perform the next level of cleaning.

  4. NOTE: If the printhead is badly clogged, it might require another cleaning cycle. If so, wait 30 minutes before you perform both levels of cleaning again.

     

Print a Print Quality Diagnostic report from the printer control panel, then evaluate the results.

  1. Make sure to load the input tray with plain, white paper.

  2. On the printer control panel, swipe the display to the left, and then touch Setup.

  3. Touch Tools.

  4. Swipe up on the display, and then touch Print Quality Report.

  5. Check for color.

If the issue persists, perform step 13 from this document - Black or Color Ink Not Printing, Other Print Quality Issues

 

Hope this helps! Keep me posted. 

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Have a great day! 

KUMAR0307
I am an HP Employee

Was this reply helpful? Yes No
Warning
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.
Didn't find what you were looking for? Ask the community or Agent Ask the Virtual Agent
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.