cancel
Showing results for 
Search instead for 
Did you mean: 
Common problems for INSTANT INK, HP+ PLANS: INK AND TONER
We would like to share some of the most frequently asked questions about Instant Ink. Check out this link: HP INSTANT INK, HP+ PLANS: INK AND TONER. .
palkap88
New member
1 0 0 0
Message 1 of 2
104
Flag Post

I bought used hp 2622 and cant connect

HP Recommended
Hp deskJet 2622
Microsoft Windows 10 (32-bit)

Hi, I bought Hp Deskjet 2622 and can't connect with computer or phone... I tried everything. It printed out wifi direct password 12345678 but it does not work.

1 REPLY 1
Kumar0307
HP Support Agent
HP Support Agent
20,530 20,532 1,497 1,746
Message 2 of 2
Flag Post
HP Recommended

Hi @palkap88

Welcome to the HP Support Community. I'd be happy to assist you.

 

Do you have access to a wireless router?

If yes, Use WPS to connect the printer to your wireless network.

  1. Locate the WPS button on your router, but do not press it yet.

    If your router does not support WPS, skip to the next step to connect the printer with the HP Smart app.

  2. Turn on the printer. If the printer is in sleep mode, press the Cancel button on the control panel.

  3. On the printer control panel, press and hold the Wireless button  for at least 3 seconds or until the wireless light starts to flash.

  4. On the router, press and hold the WPS button for 3 to 5 seconds or until it shows that the WPS connection process has started.

    NOTE: The printer stops searching for a WPS connection two minutes after the wireless button is pressed. If you were unable to press the WPS button within that timeframe, attempt these steps again.

    Once the printer connects to the wireless network, the blue Wireless light on the control panel turns on solid.

  • Make sure the printer and the PC are connected to the same wireless network.
  • This printer supports only 2.4GHz network. So, the PC should be on the 2.4GHz network.
  • If you have a Dual-band router and both 2.4GHz and 5GHz networks share the same name/SSID, the printer will not be able to connect to the network. In this case, contact your Internet service provider to assign different names to both the networks.

If you do not have a wireless router, you may connect the devices using Wifi-Direct.

Refer to this document to know how.

Note: There will be no internet access while using wifi-direct

 

Hope this helps! Keep me posted. 

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Have a great day! 

KUMAR0307
I am an HP Employee

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation