I require new ink, ink cartridge has dried - last ordered 2 years ago

[uk123451]

Need to request new ink, as old ink has dried in printer - last ordered 2 years ago. 

[Bob_Headrick]

The document here has information on contacting HP to get replacement Instant Ink cartridges.  Go to the HP Instant Ink site, the phone number (or chat option for some countries) will be listed in the lower center of the opening screen. 

Alternately, you can click on the Virtual Assistant.  When the assistant opens type "Where is my ink?" (w/o the quotes).  The system will ask a few questions and then schedule your shipment.

[Elohi_NR]

Hi @uk123451,

Welcome to HP Support Community!

To assist you better, We would need some information related to your Instant Ink Subscription. This information cannot be shared on a public post.

I have sent you a private message, reply to the message with your details.

In order to access your private messages, click the private message icon on the upper right corner of your HP Support Community profile, next to your profile Name or simply click on this link.

Keep me posted.

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

[Elohi_NR]

Hi @uk123451,

Thanks for confirming the details. I have shipped both color and black ink cartridges and it should reach you in 4-6 business days. 

I hope this helps!

Meanwhile, I want you to go through the steps below and see how it goes. 

Clean the ink cartridge and carriage electrical contacts

Remove any debris or buildup from the contacts on the cartridges and in the carriage.

Open the door or lid to the cartridge access area. Wait until the carriage stops moving before continuing.

Remove the cartridge indicated in the error message from the carriage.

Carriages with cartridge latches: Open the latch, and then pull the cartridge up and out of the slot.

Carriages without cartridge latches: Gently press down on the cartridge to release it, and then pull it out of the slot.

Holding the cartridge by the sides, remove any protective tape that still might be on the contacts.

CAUTION: 

Do not touch the ink nozzles or the copper-colored electrical strip. Touching or trying to remove these parts can result in clogs, ink failure, and bad electrical connections.

Lightly dampen a lint-free cloth with distilled water, and then wipe the copper-colored contacts on the cartridge.

Lightly dampen a lint-free cloth or swab with distilled water, and then clean the electrical contacts in the carriage.

Wait 10 minutes for the contacts to dry, and then reinsert the cartridge into its color-coded slot.

Repeat these steps for the other cartridge if it was indicated in the error message.

Close the door or lid to the cartridge access area.

If the error persists, clean the cartridge and carriage contacts a second time.

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution button, that'll help us and others see that we've got the answers!

[Elohi_NR]

Hi @uk123451,

As we did not hear from you, 
I'll be closing this case for now. If you need further assistance, feel free to reach out to us. 

Have a great day!

[Bob_Headrick]

If your cartridges do not arrive this week, please post back in this thread so we can make sure you get the cartridges you need.