Printer keep reverting back to B&W printing

[Vee1979]

When I print the printer keeps reverting back to B&W printing.  I uninstall the drivers and reinstall, it is ok for a few prints, but over time it reverts back to B&W.

[Jay_G24]

Hi @Vee1979,

I'd like to help!

Try the below suggestions-

Follow below version of the HP Print and Scan Doctor Utility by selecting your printer:

http://ftp.hp.com/pub/printers/hppsdr/patches/HPPSdr.exe

Be sure to restart your PC and allow the utility to complete the process, then check for any difference. If the issue persists, proceed to the next step.

Install the printer using the TCP/IP port:

1. On the PC, go to Control panel > Devices and printers > Add a printer(at the top) 
2. Under 'Choose a device or printer', click on 'The printer I want isn't listed'.
3. Select 'Add a printer using a TCP/IP address'
4. Find the IP address of the printer by tapping on the wireless/ethernet icon on the printer screen
5. Type in the 'IP address in Hostname or IP address' box, click next
6. Proceed to the next steps by following the on-screen instructions.
7. Try printing in color.

If the issue persists, Install the printer using Windows built-in driver

Refer to this document to know how. Try printing.

Hope this helps! Keep me posted. 

And, Welcome to the HP Support Community. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping