cancel
Showing results for 
Search instead for 
Did you mean: 
Common problems for INSTANT INK, HP+ PLANS: INK AND TONER
We would like to share some of the most frequently asked questions about Instant Ink. Check out this link: HP INSTANT INK, HP+ PLANS: INK AND TONER. .
Abhijit771
New member
1 0 0 0
Message 1 of 2
129
Flag Post

Printing problem with HP GT 5810 printer

HP Recommended
HP GT 5810
Microsoft Windows 10 (32-bit)

The GT51 and GT52 ink in the ink tank in my HP GT 5810 printer have dried out. Can someone guide me how i can flush out the dry ink and refill the tank with new ink?

1 REPLY 1
Riddle_Decipher
HP Support Agent
HP Support Agent
31,166 31,117 2,618 3,994
Message 2 of 2
Flag Post
HP Recommended

@Abhijit771 Greetings from the HP Community!

Here's all you need to know about refilling the tank on your printer:

  1. Open the ink tank lid.

    Figure : Opening the ink tank lid

    Image: Open lid
  2. Remove the plug from the ink tank you are refilling.

       CAUTION: 

    There might be ink on the underside of the plug. Place the plug upright to avoid ink transfer.

    Figure : Removing the ink tank plug

    Image: Remove the tank plug
  3. Remove the cap from the ink bottle, pull the seal tab off, replace the cap, and then flip open the lid.

    Figure : Preparing the bottle

    Image: Remove the cap and seal
  4. Hold the ink bottle on the tank spout, gently push down, and then let the ink drain into the ink tank. Fill the ink tank to just below the maximum fill line on the tank.

    If the bottle does not start draining, remove and reinsert the bottle onto the tank spout. Do not squeeze the bottle.

    Figure : Example of filling the ink tank

    Image: Drain ink
       CAUTION: 

    Do not squeeze the bottle, and do not overfill the ink tank.

  5. After the ink tank is filled, pull the ink bottle straight up.

    Close the ink bottle lid, set the bottle upright, and then push the ink tank plug into its slot on the ink tank.

    Figure : Example of replacing the ink tank plug

    Image: Replace the plug
  6. Make sure the ink tank plugs are pressed firmly into place.

    Figure : Making sure the ink tank plugs are secure

    Image: Ink tank plugs secure
  7. Repeat the previous steps to fill any other low or empty ink tanks.

       CAUTION: 

    Store any bottle with remaining ink in a cool, dry place for later use.

  8. Close the ink tank lid.

    Figure : Closing the ink tank lid

    Image: Close the ink tank lid

Keep us posted,

If you would like to thank us for our efforts to help you, 

Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 

Have a great day!

Riddle_Decipher
I am an HP Employee

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation