cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
Highlighted
New member
6 3 0 0
Message 1 of 4
222
Flag Post

Does ZCentral 2020 work with Titan RTX

HP Recommended
Z6 G4
Microsoft Windows 10 (64-bit)

Hi guys,

 

We are having trouble connecting to the sender (v20.0.0.23427) which is sitting on a Z6 G4 with a Titan RTX card. It just sits endlessly at the Establishing Connection message.

Have any of you been able to get a sender working with a Titan RTX card?

 

Many thanks,

Steve  

3 REPLIES 3
Highlighted
Author
New member
6 3 0 0
Message 2 of 4
Flag Post
HP Recommended

Sorry, I should have added that we are running on Windows 10 LTSC 1809.

 

Thanks,

Steve

Reply
0 Kudos
Highlighted
Level 7
Level 7
357 352 26 33
Message 3 of 4
Flag Post
HP Recommended

Do you ever get past the establishing connection screen, or is it just stuck there?  Are you trying to use resolution and layout matching when connecting?  It could be that since this is not a Quadro card, we are not able to successfully go any further.  We fall back to NVIDIA Quadro for resolution matching, and if that fails we try Windows.  Do you have displays attached to your sender or is it headless?  I don't believe we have done any testing with the Titan RTX card but have done testing with the Quadro RTX cards.

I work on the behalf of HP.

 

I work on behalf of HP
Reply
0 Kudos
Highlighted
Author
New member
6 3 0 0
Message 4 of 4
Flag Post
HP Recommended

Hi Kelly,

 

Many thanks for your reply!

No, it never gets passed the Establishing Connecting banner, regardless of whether the Receiver is set to "Do not change Sender display(s)" or "Set Sender display(s) to match Receiver display(s).

 

Before we installed the Nvidia driver ZCentral would connect using the BAsic Windows drivers, but performance was terrible (as you'd expect) and things like screen blanking wouldn't work. Once we installed the correct Nvidia driver, it stopped connecting.

 

The system has a physical display connected to it, which was how we could tell the screen blanking wasn't working.

Cheers,

Steve

 

Reply
0 Kudos
Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation