cancel
Showing results for 
Search instead for 
Did you mean: 
NAVIDYAGHOOBI
New member
1 0 0 0
Message 1 of 2
484
Flag Post

RGS 7.5 receiver segmentation fault and sender process termination

HP Recommended
Virtual Machine with vGPU assigned
Linux

Hi

We are having issue with HP RGS7.5 on RHEL 7.4 vritual machine with NVIDIA P40 vGPU assigned to it. 

Propoer NVIDIA GRID Display has been installed on the machine.  With following xorg configation RGS receiver will crash with segmentatin fault and RGS sender process will terminate too. By enableing "composite" extention in xorg everything is wokring fine ( However because of nature of out application we need to disable composite extention )

 

Section "Files"
    FontPath "/usr/lib/X11/fonts/misc/"
    FontPath "/usr/lib/X11/fonts/TTF/"
    FontPath "/usr/lib/X11/fonts/Type1/"
    FontPath "/usr/lib/X11/fonts/CID/"
    FontPath "/usr/lib/X11/fonts/75dpi/"
    FontPath "/usr/lib/X11/fonts/100dpi/"
EndSection

 

Section "Module"
    Load "dbe" 
    Load "extmod"
    Load "fbdevhw"
    Load "glx"
    Load "record"
    Load "freetype"
    Load "type1"
    Load "rge"

EndSection

 

Section "Extensions"
    Option "Composite" "Disable"
  EndSection

 

Section "ServerFlags"
    Option "Xinerama" "0"
    Option "DontVTSwitch" "True"
    Option "DontZap" "True"
    Option "DontZoom" "True"
EndSection

 

Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "en"
EndSection

 

Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "IMPS/2"
    Option "Device" "/dev/input/mice"
   Option "ZAxisMapping" "4 5"
   Option "Emulate3Buttons" "yes"
EndSection

 

Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "Nvidia Card - 1 connector"
    BusID "PCI:5:0:0"
    Screen 0
    Option "ConnectedMonitor" "DVI-D-0"
    Option "CustomEDID" "DVI-D-0":/etc/X11/EDID-EIZO-S2431W-1920x1200.bin"
    Option "NoFlip" "True"
    Option "NoRenderExtension" "False"
    Option "NoLogo" "True"
    Option "CIOverlay" "1"
   Option "TransparentIndex" "255"

EndSection

 

Section "Monitor"
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "24"
    DisplaySize 380 300
    HorizSync 31.0 - 81.0
    VertRefresh 56.0 - 75.0
    Option "dpms" "False"
EndSection

 

Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    Option "TwinView" "0"
    Option "metamodes" "DVI-D-0: nvidia-auto-select+0+0"
    SubSection "Display"
        Depth 24
        Visual "PseudoColor"
    EndSubSection
EndSection

 

Section "ServerLayout"
    Identifier "Default Layout"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
EndSection

 

1 REPLY 1
KellyRGS
Level 7
Level 7
541 534 41 51
Message 2 of 2
Flag Post
HP Recommended

I believe your case has already been elevated to me.  We will be trying to reproduce this issue and provide you with a resolution shortly.

I work on the behalf of HP.

I am an HP employee.
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation