cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
New member
2 1 0 0
Message 1 of 4
109
Flag Post
HP Recommended

Administrator settings in Embedded Web Server: Recover Username, Password

HP Inktank 410
Microsoft Windows 10 (64-bit)

Administrator settings in Embedded Web Server.
I am not able to reset or retrieve user name and password for advance settings of HP inkjet 410.

How I can reset the user name and password of it.Capture HP Printer.PNG

3 REPLIES 3
Highlighted
HP Support Agent
HP Support Agent
20,357 20,345 1,350 2,013
Message 2 of 4
68
Flag Post
HP Recommended

Administrator settings in Embedded Web Server: Recover Username, Password

@AkashKr,

 

Welcome to the HP Support Community!

 

I reviewed your post and I understand that you are unable to access the advanced settings page on the EWS.

 

Don’t worry, I assure you I will try my best to get this sorted.

 

I recommend you perform a network reset on the printer and check if it helps.

 

Here is how it is done.

 

● Press the Wireless button and the Cancel button from the printer control panel at the same time, and then hold them for five seconds.

 

Let me know how it goes and you have a great day!

 

If you wish to show appreciation for my efforts, mark my post as Accept as Solution. Your feedback counts!

 

Cheers!

 

The_Fossette
I am an HP Employee

0 Kudos
Highlighted
New member
2 1 0 0
Message 3 of 4
46
Flag Post
HP Recommended

Administrator settings in Embedded Web Server: Recover Username, Password

Hi 
thanks for response.

 

It didn't work with this printer. I have already tried same process as in written in booklet, contact local customer care on phone.
It still asks credential which I don't have.

I tried to reset using USB connection, but again same screen pop up for entering credentials 

0 Kudos
Highlighted
HP Support Agent
HP Support Agent
20,357 20,345 1,350 2,013
Message 4 of 4
34
Flag Post
HP Recommended

Administrator settings in Embedded Web Server: Recover Username, Password

@AkashKr,

 

Have you tried the default password? (12345678)

 

I recommend you update the printer firmware following the steps in the below article as it will flash the firmware and install the new one.

 

https://support.hp.com/us-en/document/c02919168

 

If you wish to show appreciation for my efforts, mark my post as Accept as Solution. Your feedback counts!

 

Cheers!

The_Fossette
I am an HP Employee

0 Kudos
Be alert for scammers posting fake support phone numbers on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation